Firestone Ride-Rite Air Helper Spring Kits

A: Your Ford F250/350 Ride-Rite kit comes with everything you need for quick installation, including brackets, air springs, hardware, and air line and separate valves for manual inflation. Installation typically takes one to two hours. No-drill kits take half the time. Additional Ford F250/350 air accessories, like controls and air tanks, can be purchased separately. https://www.4wheelparts.com/sku/Firestone%20Ride-Rite/standard/FIR2550.pdf

A: Yes, give them a call or send them a email. https://www.4wheelparts.ca/stores/Alberta/4wp-edmonton-ab-1026

A: You will need to measure distance from upper mount to lower mount.

A: We do not stock this item. It would ship to you from the vendor. If you call our sales team, they can reach out to the vendor to see if they have it in stock or not Toll Free: 1-877-474-4821

A: Yes this is a bolt on kit.

A: Yes! The 2713 is one of their RED Label air springs that has a max air pressure rating of 150 psi. You will need to use a compressor that has a 150 psi rating. The vendor recommends one of the 2 gallon tank options just because of the higher volume air tank.

A: Hey! 2542 is a hitch kit, and the level kit on the truck should not effect it. This kit fits 09-14 F150's. Thanks

A: Hello Jr, Yes, however you will need the additional Firestone Air Spring Lift Spacer Part Number: FIR2374. Thank you.

A: Hello Rap, They do not have jounce bump stops in this package. We do off the AIR88299 that does. You will also need the AIR25870 to run the system. Thank you.

A: Hello trexona, This part number will not fit your vehicle application. The correct part number is AIR59554. We also recommend the additional Load Controller II On-Board Air Compressor Control System Part Number: AIR25592 for your vehicle. Thank you.

A: Hello Brian, Yes, the air line is 1/4". Thank you for the question.

A: Hello Tim, Yes, this will fit your vehicle application. Thank you.

A: Hello Mongoose, No, Air Helper Springs only aid the leaf springs from overload. They do not provide lift. If you need lift we recommend either a lift block/u-bolt kit of a complete lift replacement leaf spring. Thank you for the question.

A: Hello Kevin, Yes, they can be run with minimal air in them. Thank you for the question.

A: Hello Bubba, They will install together. However, you will need to provide longer hardware to bolt it all together. Thank you.

A: Hello Dan, Yes, you will need the Air Spring Lift Spacer FIR2368 as well. Thank you.

A: Hello david, Yes, the Firestone Ride-Rite Ride-Rite Rear Air Helper Spring Kit FIR2299 will fit your vehicle application. The air bags sit outboard the leaf springs. No one makes a over-the-leaf air bag at this time. Thank you.

A: Thanks for the inquiry Russ, the Firestone Ride-Rite Ride-Rite(R); Air Helper Spring Kit part # FIR2525 you will need an air bag spacer depending on how big of lift block you have in the rear.

A: Thanks for the inquiry stu, the Firestone Ride-Rite Ride-Rite Rear Air Helper Spring Kit part # FIR2299 the 6 inch spacer is part # FIR2375 for axle mount and FIR2374 leaf spring mount.

A: Thanks for the inquiry Spunky, the Firestone Ride-Rite Ride-Rite Rear Air Helper Spring Kit part # FIR2430 these kits use 1/4 in air lines.

A: Hello Joe, Thank you for asking. The 2007 and the 2013 are different kits, you would have to order FIR2528 for the 2013 model

A: We stock the spacers but they are only needed if you install a full 6" rear replacement spring. if you only used blocks are add a leafs the spacers are not required because the distance from the frame is the same as stock.

A: Hello Vic, The Firestone Ride-Rite Ride-Rite Front Air Helper Spring Kit are available for your truck.

A: Firestone Ride-Rite Ride-Rite(R) Air Helper Spring Kit FIR2528 This is not going to come with a compressor kit. this is only going to be the bags and mounts and air line. Thank you

A: Hello Joey, Thank you for asking. The Firestone Ride-Rite Ride-Rite Air Helper Spring Kit part#FIR2335 will work on your vehicle with a in bed goose neck hitch.

A: Hello We checked with Firestone and yes will fit with the factory installed gooseneck hitch.

A: Hello Mike, Sorry for the inconvenience, The FIR2400 is for 4wd and FIR2398 is for 2wd

A: Hello Chris. The Firestone Ride-Rite Ride-Rite Air Helper Spring Kit, part # FIR2535, will fit the 2011 F-250 with an in-bed hitch. Thank you

A: Hello none and thank you for your question! Firestone Ride-Rite Ride-Rite Rear Air Helper Spring Kit would take the Daystar Cradles if you have a lifted truck so the bags don't get torn.

A: Hello Gabe, the Firestone Ride-Rite Ride-Rite Rear Air Helper Spring Kit will be completely different from the Tundra to the Ram 2500. The new truck will have a much larger bag. Thank you for your inquiry.

A: Hello Ck, the correct Firestone Ride-Rite Ride-Rite Rear Air Helper Spring Kit part# for your application is Fir2250. Thank you for your inquiry.

A: Hi Rivergoer This Firestone Ride Rite air bag kit will fit your 2006 Ram3500 4x4 Dully Thank You

A: Hello Dutch, Thank you for the question. Yes, the Firestone Ride-Rite Ride-Rite Air Helper Spring Kit will help.

A: W- Thanks for the question. Yes, the Firestone Ride-Rite Ride-Rite Rear Air Helper Spring Kit will fit your 2006 Dodge Ram 1500 mega cab 4x4.

A: Brian- Thanks for the question. The Firestone Ride-Rite Ride-Rite Rear Air Helper Spring Kit part number FIR2250 will fit some years of Chevy 2500 Duramax. My example is a 2010 2500 HD duramax. You will need to use air bag spacers to accommodate for your 6 inch lift kit

A: Hello whit957, Thank you for the question. We suggest the Level Command Heavy Duty Air Compressor System FIR2097

A: Hello Ed, Thank you for the question. Yes, the Firestone Ride-Rite Ride-Rite Rear Air Helper Spring Kit FIR2299 will fit your vehicle application.

A: Hello Larry, Thank you for the question. The Part Number: FIR2366 Firestone Ride-Rite Air Spring Lift Spacer is the smallest spacer we have for your application.

A: Hello Tim, The Firestone Ride-Rite Ride-Rite(R) Air Helper Spring Kit FIR2528 will fit your vehicle application. You will also need the Firestone Ride-Rite Air Spring Lift Spacer FIR2375 for the 6" lift. Thank you for the email.

A: Hello Scott, You should be fine with just this kit. The mounting holes have some wiggle room and should be able to make up and extra 1/4" to 1/2". Thank you for the email.

A: Hello Cowboy, Unfortunately Firestone does not offer a spacer/bracket kit for that much suspension lift. You will need to custom fabricate a pad to work. Thank you for the email.

A: Hello Eric, Here is a list of Air Spring Lift Spacer kits http://jo.my/v6c2jf You will need to measure the distance needed and purchase the one you will need. Thank you for the email.

A: Yes the firestone ride-right air spring kit will fit your 2004 dodge ram 1500

A: The FIR2255 Ride Rite Air Helper Spring Kit is designed for use on the 2WD model Excursion with a lower ride height where the 2251 is designed for the 4WD model Excursion with a much higher ride height. The bracket's between the two kits is different to accommodate the difference in the ride heights. Both kits will work on Diesel models but check clearance between the air bag and the exhaust pipe if you are running aftermarket exhaust. The bags want at least 4" minimum clearance but i want 6 to be safe. it is a good idea to fabricate a heat shield even if you have the minimum clearance.

A: There are specific kits available for some front applications depending on what vehicle you have. If you are building a custom suspension the bags are available separately and in different heights depending on your installed height. All of the bags will work in front applications but you will need to watch their load rating if you are replacing the spring with them. if your front has a coil spring there is an assist bag that goes into the middle of the coil f that space is not taken by the shock. please provide us with vehicle information and we will be better able to help you.