G2 Axle & Gear Wheel Spacers

A: 2

A: Sold as a pair (2)

A: Kelly from 4WP Corporate answered a 6x5.5, PN: 93-83-125T but the standard patter for a 2016 TOYOTA RAV4 Hybrid XLE is 5x114.3mm = 5x4.5 inches, something like this 93-65-125

A: No, you will need something like a 93-83-125T

A: I tried to mount these on my 2010 Ram 1500, but they did not fit, mounting holes TO small, I can make them fit with drilling but not sure about the life-time expectancy agter that

A: Yes these are universal fitment

A: No because your frontier has 6 studs on your hub and the product has a 5x5. You need to find some that match your hub style. Your hub size is 6x4.5

A: Hello Shello, These will not fit your '19 Nissan Frontier. You need an 6 x 4.5 bolt pattern, I can't find an G2 Axle and Gear branded spacer. These Spidertrax ones will work, part number SPIWHS025. Thanks for checking us out.

A: lugs thread pitch is not correct for nissan

A: Yes, these spacers will fit your vehicle.

A: It means 2. A pair means 2 not 4.

A: It comes with 2 spacers.  I only bought the 2 because my comanche bed pulls my wheels in. Went 1.25” in the front and 1.50” in the rear

A: Yes I had mine installed over 3 months ago. No issues (2020 Willys)

A: Yes these spacers have the correct lug stud size, and come with open nuts to bolt to Jeep. If you are using stock wheels, you can re-use the stock lug nuts. If you will be running aftermarket wheels, you would need new lug nuts. Either part number 16148 or 16148B would work and both are theft deterrent as well.

A: We show the # G/293-83-150T fits: 79-95 Toyota Pickup + 4Runner

A: Use the G2 6 on 5.5 Bolt Pattern with 1.25" Wheel Spacers (Black) - # G/293-83-125T for the '04 Tacoma.

A: Part # G/293-83-150T fits: 79-95 Toyota Pickup + 4Runner. Use: 00-06 Toyota Tundra, 96-Up Toyota 4-Runner | 6 x 5.5 1.25” | Spacer | Par # G/293-83-125T

A: The G2 5x5 Inch Bolt Pattern with 1.5" Wheel Spacers (Black) - 93-73-150 is the correct bolt pattern for the Chevrolet C10 1986 however, G2 show's it fits the 07-Up Jeep JK. # +1.310.900.2687

A: 07-Up Jeep JK | 5 x 5 | 1.5" Spacer | PN: G/293-73-150

A: The PN: G/293-38-125 Fits - 88-Up GM 1/2 Ton | Bolt Pattern: 6 x 5.5 | 1.25" Spacer. USE: 07-Up Toyota Tundra | Bolt Pattern: 5 x 150 | 2" Spacer | PN: G/293-50-200.

A: The G/293-70-200 fits 2005-2021 applications. It can work for the 1998-2004 models with 14mm x 1.5 pitch. 2005-2021 F250 / F350 uses 14mm x 1.5 | 1998-2004 F250/ F350 can have either 14mm x 1.5 or 14mm x 2.0

A: 79-95 Toyota Pickup + 4Runner | 6 x 5.5 | 1.50" Spacer PN: G/293-83-150T

A: We don't offer one for the 2021 Colorado ZR2 bolt pattern: 6x120 yet. The G2 6 on 5.5 Bolt Pattern with 1.25" Wheel Spacers (Black) - 93-83-125T FITS: 01-Up Toyota Tacoma PreRunner & 4WD | 00-06 Toyota Tundra, 96-Up Toyota 4-Runner | 07-Up Toyota FJ Cruiser

A: No the G/293-83-150T is a 79-95 Toyota Pickup + 4Runner application. Use 88-Up GM 1/2 Ton | 6 x 5.5 | 1.25" Spacer | Part Number: G/293-38-125

A: No, USE (G2 6 on 5.5 Bolt Pattern with 1.25" Wheel Spacers (Black) - 93-83-125T) '97 4Runner have 6 on 5.5 bolt pattern.

A: This is the same bolt pattern as the 2021 Ford Ranger (6 on 5.5)

A: The G/293-85-125 has a 4.25” center bore and will fit the 1986 Ramcharger.

A: Part Number: G/293-83-150T Fits: 79-95 Toyota Pickup + 4Runner. Part Number: G/293-83-125T Fits: 01-Up Toyota Tacoma PreRunner & 4WD and 00-06 Toyota Tundra, 96-Up Toyota 4-Runner. Part Number: G/293-38-125 Fits: 88-Up GM 1/2 Ton. All have a bolt pattern of 6 on 5.5.

A: Sold in pairs so comes with 2.

A: Absolutely NOT. These are for Toyota's

A: Yes this will fit the 6 on 5.5 bolt pattern: GM applications 14mm studs

A: Yes the G2 5x5 Inch Bolt Pattern with 1.5" Wheel Spacers (Black) - 93-73-150 will work, providing the 2021 Toyota Sequoia has 5 lugs with a bolt pattern of 5x5.

A: The G/293-73-150 comes with Grade 8 wheel studs

A: The G2 5x5 Inch Bolt Pattern with 1.5" Wheel Spacers (Black) - 93-73-150. CB 2.82"

A: The G2 6x5.5 Inch Bolt Pattern with 1.5" Wheel Spacers (Black) - 93-83-150T will fit a 2002 Toyota Tacoma Pre-runner that has a 6x5.5 bolt pattern,

A: The G/293-65-125 has 1/2x20 thread wheel studs and a 5x4.5 lug pattern.

A: No they will not.

A: The 2019 Jeep Compass is a 5x4.5 bolt pattern with 12mm x 1.5 wheel studs. The G/293-73-175M is a 5 on 5 bolt pattern. I do not believe G/2 has a 5x4.5.

A: These will fit your 2021 gmc sierra 1500

A: Yes they are

A: No they will not.

A: The G/293-83-125T is the correct bolt pattern and lug nut size to fit a 2006 H3 Hummer. How ever the G/293-83-125T is hub centric for a Tacoma. I do not know if the center bore would be correct for the H3 Hummer

A: I do not have a drawing on the G/293-38-125. These wheel spacers are for a 6x5.5 bolt pattern and are for 14mmx1.5 wheel studs and lug nuts. This was designed to fit 1988 and newer Chevy 1/2 ton trucks. The 2020 RAM 1500 is 6 x5.5 and has 14mm x 1.5 threaded wheel studs also.I do not know if the center bore is correct for the new RAM 1500.

A: For the spacer.

A: No you need spacers with a bolt pattern of 5x4.75, Feel free to call into the sales line to talk options and place an order. If you live near a store you can set it up for in store pick up. Sales & Support Toll Free: 1-877-474-4821 Phone Sales (PT) Monday - Friday: 5 a.m. - 7 p.m. Saturday: 7 a.m. - 3 p.m. Sunday: 8 a.m. - 2 p.m.

A: Yes they are

A: No it will not fit.

A: The 1997 Land Cruiser is 6 on 5.5 with 12mm studs so the G/293-83-150T that was designed for the early Toyota 4X4 mini truck should work. It has the large center bore so it should work with the front locking hubs and fit over the rear full floater hubs.

A: Sold as a pair.

A: Yes, 2016 F350 4x4 SRW is an 8x170mm bolt pattern.

A: No they will not fit.

A: These should bolt right onto your Trail Boss.

A: The G/293-83-125T is for 1996 and newer Toyota vehicles with a 6x5.5 lug pattern. These wheel spacers have 12mmx1.5 thread wheel studs.

A: Absolutely not. Running Nitto TG 33's and these spacers seemed perfect but when they arrived and are actually for Toyota Tacoma's not Silverado's. Refunded in store which was easy, got the right spacers from RC which most are in store at 4WHL parts.

A: No this kit will not work. The wheel spacers are vehicle specific.

A: These spacers will not fit your truck. They are for Toyota applications.

A: The G/293-65-125 will not fit the 2017 Jeep Renegade. The 2017 Renegade has a 5 on 110mm lug bolt pattern.

A: hello you will need a deep socket and a tork wench I put a combo wench between the front axle u-joint the factory lugs should work to mount tire to spacer happy jeeping

A: Hello john BRaaaaappp, Yes. they are designed for off road use. We also carry the Spidertrax brand. Thanks for checking us out.

A: The G/293-65-125 should fit the 2014 Explorer as it has a 5x4.5 lug bolt pattern and 1/2 inch wheel studs. This spacer kit was developed to fit a JEEP YJ,XJ and TJ.

A: About 1-1/2in from what I can remember when I installed mine on the ole square body. I'm pretty hard on my truck lots of burnouts on the asphalt and many miles on bumpy dirt roads and I've had no issues even with the bigger tires and wheels(35×13.50 R20×10 six lug)

A: Yes, they will fit a 2020 Silverado 4x4. They are lug centric. The bore is 4.25" and you shouldn't have to trim the stock studs.

A: No - this is the wrong bolt pattern for the FJ.

A: Yes it will fit the 2006 Lexus GX470. However the G/293-83-150T was designed for the older Toyota 4X4 pickups and these wheel spacers are 1.5 inches wide and have a large center bore to work with locking hubs. The G/293-83-125T is the most correct application. I do recommend purchasing GOR680338, 12 each of these with the pair spacers. This is a 12mmx1.5 thread, open end ET style lug nut. This would be used to bolt the wheel spacer to the vehicle and because of the extra treads that it has it would be a better choice than the open end lug nuts that come in the kit.

A: We do not have wheel spacers for your bolt pattern at this time.

A: They are a set of 2

A: Yes these spacers will work for you 04 Silverado if its a 1500, these spacers will work on any wheel that is 6 on 5.5 Bolt Pattern Thanks!

A: Please verify your bolt pattern. I believe your vehicle has 5x114.3 bolt pattern. These are for 5x4.5.

A: Yes. They are the correct bolt pattern of 6x5.5

A: no - they have the wrong wheel studs.

A: These are sold as a pair.

A: Hey Alex, These spacers would not require an alignment, just make sure both surfaces are clean of derby as much as possible for best results. Thanks!

A: These will not work with your Colorado, Feel free to call into the sales line to place an order. If you live near a store you can set it up for in store pick up. Sales & Support Toll Free: 1-877-474-4821 Phone Sales (PT) Monday - Friday: 5 a.m. - 7 p.m. Saturday: 7 a.m. - 3 p.m. Sunday: 8 a.m. - 2 p.m. Thanks!

A: The G2 5 on 150mm Bolt Pattern with 2" Wheel Spacers (Black) - 93-50-200HC is sold as a pair.

A: They sure do. If you click on the instruction tab it will bring you to a link for the instruction file. The written warranty is on the last page.

A: Yes.

A: Hi Justin, thank you for your question regarding the G2 6x5.5 Inch Bolt Pattern with 1.5 Inch Offset Wheel Spacers (Black) - 93-83-150T. These G2 wheel spacers will fit a 2016 Toyota Tacoma TRD Offroad.

A: Hello Mzzz Yes these are the correct spacers for your truck. Thanks

A: Hello Boyd These are for a 6 lug I don't show any for your Ford with the 5 on 135 lug pattern. Thanks

A: Hello patthis, All wheel spacers are lug-centric unless stated in the technical details. Thank you.

A: Hello Hugh The G/293-85-125 Wheel Spacers will fit your 1993 Bronco Thank You for your question Jon Snyder 4Wheelparts

A: Thanks for the inquiry jimmy, the G2 Axle and Gear Wheel Spacers part # G/293-65-125 you should have a 6/4.5 bolt pattern, I'm sorry but we don not offer them for your vehicle.

A: Thanks for the inquiry Ray, the G2 Axle and Gear Wheel Spacers part # G/293-83-150T I'm not showing we have spacers for your vehicle.

A: Thanks for the inquiry HUMVEE, the G2 Axle and Gear Wheel Spacers part # G/293-83-125T your truck is a 6 lug, these are correct.

A: Thanks for the inquiry Jim, the G2 Axle and Gear Wheel Spacers part# G/293-65-125 is incorrect , you'll need part # G/293-73-150.

A: Hello Steve, Yes, this will fit your vehicle application. Thank you.

A: Hello G2 does not offer the 8 lug spacers at this time. We have been told it will be towards the end of summer. Thanks

A: Thanks for the inquiry J-Ash, the G2 Axle and Gear Wheel Spacers part # G/293-73-150 these are incorrect, please call our call center 800-421-1050 for fitment.

A: Hello These are the Toyota spacers and have the small wheel studs. we only offer the 1.25 spacers for the 6 lug 14 mm size. It is part number G/2 93-38-125 http://www.4wheelparts.com/Wheels/Wheel-Spacers.aspx?t_c=11&t_s=107&t_pt=7576&t_pn=G%2f293-38-125 Thanks

A: Thanks for the inquiry Eduardo, the G2 Axle and Gear Wheel Spacers part # G/293-83-150T this will fit a 2008 FJ.

A: Hello Yes you should have the clearance you need with the 1.25 spacers. Thanks

A: Hello Mick, Yes, the G2 Axle and Gear Wheel Spacers G/293-65-125 will fit your vehicle application. Thank you.

A: Hello Yes they will work fine with your 18 inch wheels. Thanks

A: Hello They are a one time press fit being aluminum they don't recommend changing the studs. Thanks

A: Thanks for the inquiry Fin, the G2 Axle and Gear Wheel Spacers part # G/293-73-150 wheel spacers should not be necessary on aftermarket wheels with a negative offset.

A: Thanks for the inquiry Silver Fox, the G2 Axle and Gear Wheel Spacers part # G/293-73-150 is incorrect you'll need part # G/293-38-125 which is 6/5.5 bolt pattern.

A: Thanks for the inquiry Silver Fox, the G2 Axle and Gear Wheel Spacers part # G/293-73-150 is incorrect you'll need part # G/293-38-125 which is 6/5.5 bolt pattern.

A: The G2 wheels spacers will stick your rim and tire out 1.25 further from your frame.

A: Hello Morty The correct number for your truck is G/293-38-125 which is the 6 lug. Thanks