Pro Comp 32 Series Bandido Matte Black Alloy Wheels

A: 16” wheels will fit a 16” tire just be sure to double check what size tire your Honda can use with a stock set up as well as what your lug nut spacing is which is most important. I have no complaints for my set.

A: Pretty sure they will, shows your bolt pattern is 8 on 6.5 or 8x165.1 which is the same. I bought some 16x8’s for my 98 Sierra k2500 and they fit good.

A: In my experience 4WP usually ships in the next business day or 2.

A: Yes, center cap included

A: Yes, The center cap comes off, there are five screws.

A: This is the correct bolt pattern for the 2015 Ram 3500. The Lug nuts are M14 x 1.5

A: Yes the Pro Comp 32 Series Bandido, 18x9 Wheel with 6 on 5.5 Bolt Pattern - Flat Black - # PXA7032-8983 - will fit the 2019 GMC Sierra Limited without any fitment issues. Just make sure you add Pro Comp 24-Piece 14x1.5 Lug Nut Kit (Black) - # PXA16144B (Thread Size: M14 x 1.5)

A: Yes it will fit but maybe outside of the manufacturer’s recommend rim width. Best to look up the specs from the tire manufacturer and see what the recommended rim width is.  

A: Yes the Pro Comp 32 Series Bandido, 16x8 Wheel with 6 on 5.5 Bolt Pattern - Flat Black - 7032-6883 will work.

A: Yes be sure to select proper bolt pattern

A: No - our wheels are lug centric.

A: Use: Genuine Packages Black Lug Nut Kit PN: BLACKLUGS (Gloss Black)

A: 245/65R17 tires have a diameter of 29.5", a section width of 9.6", and a wheel diameter of 17". Generally they are approved to be mounted on 8-8.5" for LT tires. Something like this: Method Race Wheels 305 NV, 17x8.5 with 8 on 170 Bolt Pattern - Matte Black - MR30578587500

A: The bolt pattern, size and width all check out. I would just verify the offset and center bore to make sure those work on your truck.

A: The cap bolt size is M6-1.0x35mm

A: The center cap will come as pictured.

A: Each wheel weighs 29#

A: Yes they will fit. That tire converts to 31.6 x 10.4 x 16

A: Yes, this will fit your vehicle.

A: Yes these should fit. Just verify the backspace and offset for your truck clearance.

A: 2200lbs load rating per wheel

A: Spline drive lug nut with a 60 degree conical seat.

A: We need a little more info about your setup to get you the correct parts. Please call our sales line Toll Free: 1-877-474-4821

A: It depends on what wheels you want to run. Did you have any style or brand in mind? Also, what size tires are you running? We have some more questions before we can recommend parts. Please call our support team Toll Free: 1-877-474-4821

A: The offset is -6.

A: No, you need wheels that are 6x4.72" (120mm). Please call our sales line toll free at 1-877-474-4821

A: This is not the correct bolt pattern for your Grand Cherokee. You need 5 on 5 bolt pattern. Either of these will work depending on what size you need: https://www.4wheelparts.com/p/pro-comp-32-series-bandido-16x8-wheel-with-5-on-5-bolt-pattern-flat-black-7032-6873/_/R-BKBQ-7032-6873 https://www.4wheelparts.com/p/pro-comp-32-series-bandido-wheel-17x9-with-5-on-5-bolt-pattern-flat-black-7032-7973/_/R-BKBQ-7032-7973

A: Backspace and offset are 2 different measurements. This wheel does have an offset of 0MM and the backspace is 4.5", so both are correct on this wheel.

A: Please confirm your bolt pattern. I am showing your truck has 8x6.5 bolt pattern. For further assistance please call our support team Toll Free: 1-877-474-4821

A: NO lugs and stems are not included

A: Yes this will fit. That tire equals 34.6x12.4R16.

A: I do believe this wheel will fit the Tacoma but I would suggest test fitting a wheel on the vehicle before mounting a tire to it just to be sure in case it does not fit, you can return it.

A: I can’t answer that, but i can tell you that i put these wheels on my 08 tundra and they look awesome. You just need the 5x 150 lug size. That’s what fits your truck. 4wp emailed me when i purchased mine to verify truck model for fitment

A: 29#

A: They will. Bolt pattern is correct. Center bore on this wheel is 108. Colorado is 100.3.

A: Yes, the Pro Comp 32 Series Bandido, 16x8 Wheel with 6 on 5.5 Bolt Pattern will fit your 2020 Toyota Tacoma SR5.

A: Thanks for the inquiry G, the Pro Comp Alloy Wheels Series 7032, 18x9 with 6 on 5.5 Bolt Pattern - Flat Black part # PXA7032-8983 lug nuts are sold separately.

A: Hello Max, Yes, this wheel will allow you to install a 225/75R16 tire on it. Thank you.

A: Hello max and thank you for your question! Pro Comp Alloy Wheels Series 7032, 16x8 with 5 on 5 Bolt Pattern - Flat Black is the correct 5x5 bolt pattern for your 2004 Jeep Grand Cherokee.

A: Hello Graywolf and thank you for your question! Pro Comp Alloy Wheels Series 7032, 17x9 with 5 on 5 Bolt Pattern - Flat Black will not fit your CJ-5, you would need a 5x5.5 bolt pattern wheel. Use PXA7032-7985 which will fit your CJ-5.

A: Thanks for the inquiry Jason, the Pro Comp Alloy Wheels Series 7032, 18x9 with 5 on 150 Bolt Pattern - Flat Black part # PXA7032-8955 these will fit your vehicle.

A: Thanks for the inquiry Lance, the Pro Comp Alloy Wheels Series 7032, 16x8 with 6 on 5.5 Bolt Pattern - Flat Black part # PXA7032-6883 this will fit your application for a 1500 NON-HD.

A: Hello Braxton and thank you for your question! Pro Comp Alloy Wheels Series 7032, 17x9 with 6 on 5.5 Bolt Pattern - Flat Black do come with the center caps in the picture.

A: Hello Sergio Yes this wheel was designed to work on the Jeep JK's and Rubicons like yours. Thanks

A: Thanks for the inquiry Mike, the Pro Comp Alloy Wheels Series 7032, 16x8 with 6 on 5.5 Bolt Pattern - Flat Black part # PXA7032-6883 these will work on a 2008 4 runner.

A: Thanks for the inquiry Warmor, the Pro Comp Alloy Wheels Series 7032, 17x9 with 5 on 5 Bolt Pattern - Flat Black part # PXA7032-7973 is incorrect you'll need part # PXA7032-7983.

A: Hello Mike, Yes, this wheel will fit the 265/75R16 tire. Thank you.

A: Hello Jules, This wheel will not fit your vehicle application. Your vehicle has a 6 on 139 or 6 on 5.5 lug pattern. Thank you

A: Hello jeff.siler, No, The 2011 Toyota Tacoma requires a 17" or larger wheel .Thank you.

A: Thanks for the inquiry Jlag00, the Pro Comp Alloy Wheels Series 7032, 17x9 with 8 on 6.5 Bolt Pattern - Flat Black part # PXA7032-7982 these will work fine for your application

A: Sir, this wheel will work as long as you don't exceed 33" tire diameter. Thank you for your question.

A: Luis, these are a good fit for your Jeep XJ. Thank you for your question.

A: Hello Zack and thank you for the inquiry on the Pro Comp Alloy Wheels Series 7032, 17x9 with 5 on 5 Bolt Pattern - Flat Black. This particular part number will not fit your 1999 GMC SIERRA. Please follow this link for the correct part number for your vehicle: http://jo.my/ne3uwk.qrcode

A: Thanks for the inquiry Tav, the Pro Comp Alloy Wheels Series 7032, 18x9 with 8 on 6.5 Bolt Pattern - Flat Black part # PXA7032-8982 you should have no problem fitting these on a 2014 RAM 2500.

A: Hello Robert, Thank you for asking. The Pro Comp Alloy Wheels Series 7032, 16x8 with 6 on 5.5 Bolt Pattern - Flat Black might require you to grind the brake calipers to clear. We recommend a 17" or larger wheel.

A: Hello Jared, Thank you for asking. The Pro Comp Alloy Wheels Series 7032, 17x9 with 6 on 135 Bolt Pattern - Flat Black will work as long as you have 6 lugs on your vehicle, 2003 was a split year, it might be 5x135. 35" tall tires will be too large, we recommend no larger than a 33" with 3" lift.

A: yes these will fit 6on135 the biggest tires would be a 32" 265/70R17 stock unless you do a 2" level kit then you can fit a 33" tall tire. thanks

A: Hello Bill, Thank you for asking. The Pro Comp Alloy Wheels Series 7032, 16x8 with 5 on 5 Bolt Pattern - Flat Black is for your vehicle and will work with a 285/75/16 tire.

A: Hello You will need to look for wheels with the 5 on 5.5 lug pattern for your truck. The 16x8 will work with the 285/75r16 tires. The 7032 series does not come in the 5 on 5.5 bolt pattern.

A: Hello there, the Pro Comp Alloy Wheels Series 7032, 17x9 with 6 on 5.5 Bolt Pattern - Flat Black will be able to use factory TPMS but my be damage when trying to reuse them. We sell them here is you need them. please fill free to call me @ 8003379005 ext:5923. Shop with us anytime, on your schedule. Browse 4WheelParts.com, call our customer service center, or come visit us in one of our stores. You can even save on shipping costs by shopping online and picking your order up in a store. No matter which method you prefer, we’re ready to help with excellent parts, advice, and service.

A: Hello David, the Pro Comp Alloy Wheels Series 7032, 17x9 with 8 on 170 Bolt Pattern - Flat Black part# PXA7032-7970 will be a great fit with your current setup. Thank you for your inquiry.

A: Thank you for your question josh. No this wheel will not fit your Toyota Tacoma. We will need to know what drive wheels you have and if it is a pre-runner to get you the correct ones. Those options do not come in this bolt pattern.

A: Hunter, Yes the Pro Comp Alloy Wheels Series 7032, 18x9 with 6 on 5.5 Bolt Pattern - Flat Black will fit the 08 Suburban 1500 without any fitment issues. Just make sure you select the box for the correct lug nuts at checkout.

A: Hello Dj, the Pro Comp Alloy Wheels Series 7032, 16x8 with 6 on 5.5 Bolt Pattern - Flat Black part# PXA7032-6883 will fir your vehicle. Thank you for your inquiry.

A: Hello Gerald, Thank you for the question. Part Number: ProCmpBlackLug are just a standard lug nut. They are not spline or luck nuts.

A: Hello OregonWarrior, Thank you for the question. No, they will not fit your vehicle application. The lug pattern on your vehicle is a 5 on 150 and the minimum diameter wheel you can install is a 17".

A: Hello Bobby, Thank you for the question. Yes, the Pro Comp Alloy Wheels Series 7032, 16x8 with 6 on 5.5 Bolt Pattern - Flat Black Part Number: PXA7032-6883 will fit your vehicle application. You will also need to upgrade lug nuts to the Part Number: ProCmpBlackLug (Black) or Part Number: ProCmpChromeLug (Chrome)

A: Hello Stu, Thank you for the question. The Pro Comp Alloy Wheels Series 7032, 17x9 with 6 on 5.5 Bolt Pattern - Flat Black PXA7032-7983 will fit with your tire configuration.

A: Hello Colin, Thank you for the question. The 2013 Chevy Silverado 1500 2WD lug pattern is 6 on 139 or 6 on 5.5. This wheel will not fit your vehicle application.

A: Hi George the wheel comes with the center caps. you will need to know what the thread of your wheel studs or vehicle application and you will want a spline drive lug nut to fit the stud size thank you

A: Hi George Yes these wheels will fit over you7r locking hubs. Thank You

A: Thank you for your question. Fabtech recommends that you use 275/65R18 tire w/ 18x8 wheels w/ 4-1/2” BS w/ minor trimming which is a 32x10.5 tire. I would look for a wheel that fit the lift manufacture recommendations.

A: Chris- Thanks for asking. You would need a 12x1.50 lug set for your 2005 Toyota Tundra Double Cab SRK 2wd which you can find here http://jo.my/g237x2

A: Eric thank you for your question. The Pro Comp Alloy Wheels Series 7032, 18x9 with 6 on 135 Bolt Pattern - Flat Black part number PXA7032-8936 does have a center cap that is sold separately. Here is a link http://jo.my/pxa703165500 as for a TRD cap fitting this wheel we do not have the measurements of their caps.

A: Bryan the Pro Comp Alloy Wheels Series 7032, 16x8 with 5 on 4.5 Bolt Pattern - Flat Black part number PXA7032-6865 will fit your 2013 Toyota Tacoma if it has 5 lug wheels. Some Toyota Tacomas also have a 6 lug.

A: Yes the Pro Comp Wheel Series 7032 part number PXA7032-6883 wheel will fit your 1999 Tacoma Truck.