Pro Comp 69 Series Vintage Flat Black Alloy Wheels

A: Hi I bought some of these last year and is there a easy way to clean them I haven't really found a good way to clean them I touched the rims with my dirty hands and it left fingerprints on it that's hard to come off

A: Yes center caps are included

A: Yes

A: Yes the Part Number: PXA7069-5865 includes a center cap.

A: Yes, I installed on a 1985 cucv blazer that has Chevy 10 bolt axles in it. They are 6 hole wheels on 5.5 fit and look great...

A: I believe it is 106mm. That is the center diameter on hub centric wheel spacers. I've used those spacers with these wheels. Recommend either the spacers or the rings to make sure you don't get vicious wobbles when the wheel is off center.

A: These wheels should have a center bore of 4.25.

A: They are lug centric and will require the acorn style lug nuts. I have them on my 05 tundra with the bigger brakes and they clear just fine. I’m running 285/75/r16 with no rubbing lock to lock with these rims. No spacers needed. They have balanced great and have held up just fine. 

A: I have the tundra brake upgrade on my 2000 4runner. Offset is enough to clear the calipers without spacers! Hope this helps!

A: The set I ordered came with four closed center cap. If you have lockout hubs on 4x4 you can pop the end cap off. 

A: Yes, the Pro Comp 69 Series Vintage, 16x8 Wheel with 8 on 6.5 Bolt Pattern - Flat Black - PN: PXA7069-6882 comes with a 5.15" Push through 2 piece center cap - BLK.

A: Take a look at your lug nut set up   If you see 6, then yes, they’ll fit.   Next?   -John from ProComp

A: This is the correct 6 on 5.5 Bolt Pattern for the 2002 Toyota Tundra.

A: Yes the -12 offset it will stick out an inch or 2

A: Yes they should fit. And there will be a slight “poke”. It makes it look more aggressive not childish. 

A: Yes tires rub a little I also have a 2inch lift I think it’s just my fender well on one side though 

A: I have the Procomp 69 series 16 × 8's on my Tacoma . BFG 265/75/R16's fit and look great .

A: No

A: Each wheel weights 24lbs. PXA7069-7973 (flat black only). We have the Pro Comp 45 Series Proxy, 17x9 Wheel with 5 on 5 Bolt Pattern - in a Satin Black PN: PXA5045-7973

A: Assuming you mean 245/75/16, yes they should fit fine.

A: Yes

A: Honestly not sure

A: No - this is not the correct bolt pattern.

A: I have a 2016 stock Tacoma SR5 access cab with no leveling kit and I just clear calipers and rub just the tiniest bit running 265/75-r16 Falken wildpeaks

A: We recommend 17” aluminum wheels. Only 16” wheels that are tested on Tacomas are Method Race wheels.

A: No. Pro comp 69 uses cone shape lug nuts

A: Our wheels require the use of 60 degree conical seat lug nuts. As long as your lug nuts have a 60 degree conical seat taper, you will be fine.

A: The hub diameter on these is too small at 80mm. The 5G Ranger comes with a 93mm hub diameter.

A: Did your Ranger come stock with 16 or 17" rims? If 17s, this is the right size and bolt pattern to fit. You would just need to verify the offset and backspacing is correct for clearance. Feel free to call our sales team for further assistance Toll Free: 1-877-474-4821

A: The bolt pattern is 5 lug by 4.5 inches on center

A: No - this is not the correct bolt pattern for your Dakota. I believe your truck is 6x114.3

A: I do not know for sure. If the Jeep is 5x4.5 lug pattern they should work. The research I did on them stated that Jeeps carried the same lug pattern. I put them on a old Ford Falcon. 

A: No this is the wrong bolt pattern for your CJ. You need 5x5.5

A: Yes it will 

A: It might fit, however due to the -12 offset it will likely rub. If looking for a 16x8 wheel I would suggest looking for something like more of a 0 offset.

A: It does on mine. However, i have a bit of rub at full lock when backing up and turning running 285's with my 2" icon coil over lift lift and Dirt King control arms. I would siggest a 3" coul over lift and lightracing control arms. The wheels do have a very attractive poke.

A: 17" should from what I hear. Stock is 7.5 wide so, might rub depending on tire size.

A: I have a 305/70/16 and run these wheels without any problems. Have a 3” RC lift 3g4r no rubbing when I have a good alignment

A: I have 285/75/16 on mine without issue. I can’t speak to a 295 though. Good luck. 

A: We have these wheels on a Gen 2 ('02-'06) CRV and they will rub the plastic wheel arch guard BUT you can cleanly cut & sand the wheel-arch guard where it rubs (it's at around 2:00/3:00 on the front left wheel or 9:00/10:00 on the front right wheel) to make the spatial allowance. If you're careful too, you can make it can look as though the guards came cut that way.  Also, once fitted the wheel protrude roughly around 1.75" to 2" (but looks cool).

A: This is the correct bolt pattern for your CR-V. It would depend on if you have the clearance for them and what tires you plan to run. Please call our support team for more information Toll Free: 1-877-474-4821

A: Center Bore: 108mm

A: They should as long as the bolt pattern is 4.5 inches on center

A: Not sure. I bought them for my 02 Ranger. They fit perfect on it.

A: This is the correct bolt pattern for the 1988 Mitsubishi Montero 4x4.

A: The Pro Comp 69 Series Vintage, 15x8 Wheel with 6 on 5.5 Bolt Pattern - Flat Black - PN: PXA7069-5883 is the correct bolt pattern.

A: The Pro Comp 69 Series Vintage, 16x8 Wheel with 8 on 6.5 Bolt Pattern - Flat Black - 7069-6882 is the correct bolt pattern 8x165.1 (8x6.5)

A: Pro Comp 69 Series Vintage Wheel, 17x9 with 6 on 5.5 Bolt Pattern - Flat Black - 7069-7983 is the correct bolt pattern.

A: Yes the Pro Comp 69 Series Vintage Wheel, 16x8 with 6 on 5.5 Bolt Pattern - Flat Black - 7069-6883 is the correct bolt pattern 6x139.7 (6x5.5) for the 2017 Chevy 1500, would consider the Pro Comp 69 Series Vintage Wheel, 17x9 with 6 on 5.5 Bolt Pattern - Flat Black - 7069-7983 so there isn't a fitment issue.

A: Depending on the Year of the E150 - Bolt Pattern: 5x139.7 (5x5.5) or 8x165.1 (8x6.5)

A: Yes they are TPMS compatible.

A: Please give us a call Sales & Support - 877-474-4821 and use Item Number PXA8327042

A: You must measure the distance between the studs to figure out to purchase the correct wheels,if these are in fact compatible.

A: The Bolt Pattern: 6 on 5.5 is correct for the 1990 Toyota Pick-up 4x4.

A: The stock Tacoma truck will uses a positive offset +20 wheel.

A: The Pro Comp 69 Series Vintage, 15x8 Wheel with 6 on 5.5 Bolt Pattern - Flat Black - 7069-5883 is the correct bolt pattern for the 1991 4runner 4wd. Thread Size: M12 x 1.5 (Lug nut size)

A: The 1996 F-150 4x4 has a bolt pattern of 5x139.7 (5x5.5) with Thread Size: 1/2" - 20 UNF (Lug Nuts) Recommended: Pro Comp 69 Series Vintage, 15x10 Wheel with 5 on 5.5 Bolt Pattern - Flat Black - PXA7069-5185

A: The Pro Comp 69 Series Vintage Wheel, 15x8 with 5 on 4.5 Bolt Pattern - Flat Black # PXA7069-5865 is the correct bolt pattern for the '00 Ford Ranger.

A: Lug Seat: Conical (acorn) w/ the correct thread size for your vehicle.

A: Match the bolt pattern to your vehicle, use the left navigation to filter down the results,

A: The 2003 Ford Expedition has a bolt pattern of 6 on 135 and you will need a positive offset +18 to + 44. https://www.4wheelparts.com/b/tires-wheels/wheels/6-on-135/_/N-cm5b1Z1z043dy

A: The Pro Comp 69 Series Vintage Wheel, 17x9 with 6 on 5.5 Bolt Pattern - Flat Black - 7069-7983 is the correct bolt pattern for the 2011 Silverado 1500 4WD - 6x139.7mm (6x5.5")

A: The Pro Comp 69 Series Vintage, 16x8 Wheel with 8 on 6.5 Bolt Pattern - Flat Black - 7069-6882 - You will need part number EXC139B (Closed Cap) or EXC112B (Open Cap). Give us a call 800-421-1050

A: Recommended for a stock 4Runner is a Positive offset 6 like the Pro Comp 29 Series La Paz, 16x8 Wheel with 6 on 5.5 Bolt Pattern - Satin Black - PN: PXA5029-6883 w/ a 265/70R16 Tire.

A: These are universal fitment just be sure to select proper bolt pattern

A: These are universal fitment just be sure to get the proper bolt pattern. Please call our sales team for more information Toll Free: 1-877-474-4821

A: $139.99 is the actual price and $104.99 is the price after the 25% off.

A: The 6x139.7 bolt pattern, also called 6x5. 5", is the correct bolt pattern for the 1999 Nissan Frontier 4x4.

A: Yes the 6 on 5.5 will work just fine.

A: The 2003 Ford Ranger 4x4 has a bolt pattern of 5x114.3 (5x4.5) use: Pro Comp 69 Series Vintage, 16x8 Wheel with 5 on 4.5 Bolt Pattern - Flat Black PN: 7069-6865

A: I wouldn’t try to put them on 6x5.3 (6x135) Ford bolt pattern as it might create wheel vibration when driving. The offset -6 (negative six). 

A: The offset is not correct for your Bronco. Most of the wheels we've seen for Bronco are +25 or +35

A: 26#

A: You need 16” wheel minimum, 15’s will not work.

A: Yes these will fit.

A: Minimum of 16” alloy wheel, on that year.

A: Please verify what bolt pattern your truck has. It could be 5x4.5 or 6x5.5. They also have 14 or 15" wheels. You can call our sales team for further assistance on your set up Toll Free: 1-877-474-4821

A: You need 16” wheel minimum, 15’s will not work.

A: They will fit if your truck is 4WD.

A: The size and bolt pattern is correct for your application. I would verify the offset and backspacing is correct and will clear your calipers.

A: Yes!

A: If your Tacoma came stock with 16" rims, then the size and bolt pattern on these would fit. If it came with 17" wheels, these would not fit. You need to also verify the offset and backspacing are correct for your set up.

A: The bolt pattern and size are ok but the offset is not. I believe your stock offset is 64.1mm and use hub centric rings. Please call our sales line to see what wheels we have that will work for your vehicle Toll Free: 1-855-554-2400

A: You need splined lug nuts which we offer that come with a thin wall socket.

A: You need splined lug nuts which we offer that come with a thin wall socket.

A: The bolt pattern and size will fit. Please verify if the offset and center bore is what you need.

A: Yes they should fit.

A: What submodel do you have? In 1998, the base and the SR5 editions came with 15 in wheels. The limited's came with the 16 inch. As long as your stock wheels are 15", these would fit.

A: The center bore on these wheels is 3.180 in. or 80.77mm

A: Yes it will fit.

A: The offset on this wheel is -19.00mm. All Pro Comp wheels are lug centric, not hub centric.

A: What size tire are you planning on running? These wheels are 8" wide. It depends on what size tire you plan on running. For example, when I had these wheels, I ran a 35x12.50-15 tire on it. Please call our sales team to discuss your options Toll Free: 1-877-474-4821

A: I prefer 17 inches 

A: Center bore is 4.250"

A: Yes they will fit.

A: No you need a bolt pattern of 6x5.5 Part# PXA7069-6883 would work just fine. Follow this link : https://www.4wheelparts.com/p/pro-comp-69-series-vintage-wheel-16x8-with-6-on-5-5-bolt-pattern-flat-black-7069-6883/_/R-BKBQ-7069-6883

A: No I believe you need a bolt pattern of 5x100 Feel free to call into the sales line to place an order. If you live near a store you can set it up for in store pick up. Sales & Support Toll Free: 1-877-474-4821 Phone Sales (PT) Monday - Friday: 5 a.m. - 7 p.m. Saturday: 7 a.m. - 3 p.m. Sunday: 8 a.m. - 2 p.m.

A: Yes it is the correct bolt pattern and will work with that size tires. I would just verify the backspace and offset to make sure you have the clearance.

A: No - that is not the correct bolt pattern. You need 5x5 bolt pattern.

A: Yes they do

A: No we do not.

A: Yes they are included.

A: If your vehicle is produced before April of 99, you will need part number EXC139 (this is silver and will not match the existing pro comp caps) If your vehicle production date is after April of 99 you would need pxa8515242

A: This is not the correct bolt pattern unless you changed your axles. You need 5x5.5 for a CJ.

A: Center caps are included. Thanks

A: Unfortunately we haven’t test fitted any wheels on a 99 ford explorer. We don’t know how it will look.

A: This is the correct bolt pattern for your truck. What size wheels do you have on there now? That will determine if a 17" wheel and tire will clear. Toll Free: 1-877-474-4821

A: These wheels will fit if your 2009 Tacoma came stock with 16” wheels. If your truck came with 17” wheels, they will not fit.

A: Yes this should fit. Verify the offset and backspace to make sure you have the clearance, but this is the correct bolt pattern and size for those tires.

A: Please verify this but I believe your bolt pattern is 5 on 4.75. If that is the case, these wheels are not correct.

A: This will fit your JT no rings needed. The wheel will be pushed out closer to the fender line. Thanks!

A: Yes, this will fit your vehicle. The wheel will be pushed out closer to the fender line.

A: I think we do have them, please call us at 877-474-4821 so we can further assist you. Thanks for checking us out.

A: The center bore of cap 8327041 is 3.27". Please call our sales line toll free at 1-877-474-4821 for more options

A: Hello joe and joe, These wheels should fit your 2017 4Runner. Thanks for checking us out.