Pro Comp Lateral Traction Bars

A: Pro Comp Suspension Traction Bar Mounting Kit EXP72099B

A: The replacement bushings are going to be part # EXP90-6163

A: Dave has no idea what he's talking about. SR5 is a trim package, Pre-runner is a suspension package. You can have both SR5 & Prerunner, or one, or neither. Same with Limited (LX). Most differences were cosmetic. Nothing is different for the sake of this part. 4WP should only be distinguishing between 5-lug or 6-lug 1st gen Tacomas. Here is the associated mounting kit (P/N: 77182B): https://www.4wheelparts.com/p/pro-comp-traction-bar-mounting-kit-77182b/_/R-DFCW-77182B

A: Sorry Pre Runner is not listed - 1999 Toyota Tacoma Limited | 1999 Toyota Tacoma SR5 | 1999 Toyota Tacoma Base

A: Traction bars keep the axle from twisting backwards while it forces the drive wheels to turn forwards, completely eliminating leaf spring windup, and keeping the rear drive wheels forced down to the pavement for superior traction.

A: Yes, use the Pro Comp Suspension Traction Bar Mounting Kit EXP72099B

A: Give us a call: 800-421-1050

A: Here are the instructions listed under the Bracket Part Number: EXP72101B https://www.4wheelparts.com/sku/Pro%20Comp%20Suspension/standard/72101B_INST.pdf

A: Yes with the correct mounts

A: The # EXP72400B is 67” long. You will need to measure from bottom of axle at the leaf spring mount 67” to the frame. Mounting Kit Part Number (Required and Sold Separately) Use # EXP72099B (2010 - 1980 F-350 / F-250)

A: Yes, Pro Comp Lateral Traction Bars (Black) - 72400B will fit.

A: Almost positive they will not want to check with the tech but I put them on a 99 2000 powerstroke quad cab they work great

A: We have not tested out components to fit with other manufacture components.

A: All traction bars require at least a 1” block between axle and leaf spring for the mounting bracket to work.

A: Bar length 74” (Must use bars with mount kit 72098B)

A: No this is for a F-250/350=, Feel free to call into the sales line to talk options and place an order. If you live near a store you can set it up for in store pick up. Sales & Support Toll Free: 1-877-474-4821 Phone Sales (PT) Monday - Friday: 5 a.m. - 7 p.m. Saturday: 7 a.m. - 3 p.m. Sunday: 8 a.m. - 2 p.m.

A: Bar PN: 71000B | Mount PN: 71199B

A: No this will not work.

A: The traction bar mounts sandwich between the leaf spring and the leaf spring mount pad on axle. Any interference in this area will not allow the mount brackets to install.

A: Part number 71199B

A: Hello, Traction bars 72500B. Also need Mounting kits 72007B or 72083B. Please call us to find out which you will need 877-474-4821. Thanks for checking us out.

A: No, It is for Xtra cab.

A: Set of bushings EXP90-6163

A: The 72400B is 67” long. You will need to measure from bottom of axle at leaf spring mount 67” to frame and see if there is any interferences (cross beam, mount, etc..) If no interferences, then go to go. If have interferences, then may need to look at using the 72300B 50” bars, same measurement will need to be done for checking for interferences.

A: Part number 71182B

A: Yes it will fit.

A: Traction Bar 71000B Mount kit 71199B

A: No, use 72500B with 72096B.

A: The traction bars require a minimum of a 1” rear block between axle and leaf spring to work.

A: Yes it will fit.

A: 72301B bars require the mounting kit 72101B. Mount kits requires at least 1” lift block between leaf spring and axle to work.

A: Yes these would work for your 2012 F250

A: Replacement Bushing kit part number is EXP90-6163

A: Yes

A: Yes they will fit

A: Yes you do

A: The Pro Comp Traction bars were design for lifted trucks to counter axle wrap from using larger rear lift blocks. These were never tested on stock height vehicles.

A: We need a little more info about your setup to get you the correct parts. Please call our sales line toll free at 1-877-474-4821

A: We need a little more info about your setup to get you the correct parts. Please call our sales line toll free at 1-877-474-4821

A: 72300b uses 90-6122 bushing pack, but if were going based off of your year vehicle, it should have a 72400b with 90-6163 bushing pack.

A: 67 inches.

A: You would need part number EXP71182

A: We need a little more info about your setup to get you the correct parts. Please call our sales line toll free: 1-877-474-4821

A: Unfortunately no Pro Comp does not make traction bars for your vehicle.

A: Hey Anthony, We need a little more info about your setup to get you the correct parts. Please call our sales line Toll Free: 1-877-474-4821 Thanks!

A: Those can only be replaced as a service part. Please call our Customer Service team to order new bushings. Customer Service 1-877-474-4821

A: They should as long as the rear leaf springs are on top of the axle. See part number 72099B and the linked instruction file for how the mounting brackets attach to the truck. This listing is for the traction bars only. A separate mounting kit is also required. If you have any questions you can contact our customer service center toll free at 877-474-4821

A: Hello Countryboy, We need a little more info about your setup to get you the correct parts. May also need some photos. Please call our sales line. Toll Free: (855) 554-2400 (CANADA) or 1 (877) 474-4821 (USA) Thank you for checking us out, we appreciate your business.

A: No, the Pro Comp Lateral Traction Bars (Black) - 72500B will not fit your 2016 Ram 3500.

A: Hello James, You will need the Pro Comp Lateral Traction Bars Part Number EXP72500B and Pro Comp Traction Bar Mounting Kit Part Number EXP72077B for your vehicle application. Thank you.

A: Hello Alexis, Sorry, none of the lateral traction bars will fit the 8.5" lift. Thank you.

A: Hello Noalie The EXP72400B will work on your truck if it is an extra cab or crew cab model and 4WD. You will also need a EXP72099B mounting kit to go with the Traction Bars. Thank You for your question. Jon Snyder

A: Hello Todd The EXP72300B is not for your truck. Your F-150 FX4 Super Crew will need a EXP72500B Traction Bar Kit and a EXP72096B Mounting Kit. Thank You for your question. Jon Snyder 4Wheelparts

A: Thanks for the inquiry jeffypoo, the Pro Comp Suspension Lateral Traction Bars part # EXP72500B in incorrect for your 2004 4x4 f250, you'll need part # EXP72400B along with EXP72099B.

A: Thanks for the inquiry jimmy, the Pro Comp Suspension Lateral Traction Bars part # EXP72400B will require the mount part # EXP71200B.

A: Hi Craig The EXP71000B Lateral Traction Bars are not for your Big Chevy that part number is for a Tacoma. You will want EXP72400B Traction Bars and EXP71200B Mounting Kit This will be an excellent set up on your 2003 Silverado 2500HD! Thank You Jon Snyder 4Wheelparts

A: Hi Seth The EXP7500B Pro Comp Traction Bars work best with a 4 to 6 inch lift kit where the rear is lifted 2.5 t0 5 inches. These bars are excellent for controlling rear leaf spring wrap up and wheel hop. They are great for hi performance driving, towing and better traction. They do require a mounting kit that is application specific. Your truck requires a EXP72096B mounting kit. Thank You Jon Snyder 4Wheelparts

A: Thanks for the inquiry jesse, the Pro Comp Suspension Lateral Traction Bars part# EXP72400B these are incorrect use part # EXP72300B with the mount kit EXP72101B and these only work on a crew cab short bed.

A: Thanks for the inquiry Jim, the Pro Comp Suspension Lateral Traction Bars part# EXP72400B will work with part # EXP72099B.

A: sir, unfortunately ProComp doesn't make one for your application thank you for your question.

A: Hello Max, The Pro Comp Suspension Lateral Traction Bars will work with a 8.5"lift.

A: Thanks for the inquiry Josh, the Pro Comp Suspension Pro Comp Lateral Traction Bars part # EXP72300B will NOT work on a long bed truck.

A: Nick Smith from United States,Thanks for the question.Part # EXP72400B Pro Comp Suspension Lateral Traction Bars will work on your 2000 F250.You will need mounting bracket part # EXP72099B to mount traction bars.

A: Sorry the traction bars we sell are only made for lifted trucks they will be too long for a stock truck. You would have to cut them down to make them shorter to make them fit.

A: Thanks for the inquiry Rnlcomp, the Pro Comp Suspension Lateral Traction Bars part # EXP72500B will require part # EXP72096B (CREW CAB) and EXP72095B (EXT CAB).

A: Hello Phil, you would nee either EXP71200B or EXP72099B for Pro Comp Suspension Lateral Traction Bars depending on what model 2013 Chevy you have.

A: Yes these will fit the 8" lift but you will need the mounting brackets along with the bars for your F350

A: Hello Ukfan, the Pro Comp Suspension Lateral Traction Bars part# exp72300b will fit your 08 f-350 with an 8" lift. Thank you for your question.

A: Thanks for the question Paul, this kit is designed to fit on the xcab chassis not the double (crew) cab.

A: Hello john and thank you for your question! Your 2012 F250 would take the 50" Pro Comp Suspension Pro Comp Lateral Traction Bars.

A: Hello Bubba, the Pro Comp Suspension Lateral Traction Bars will work up to an 8" lift no problem. you may need to re drill the mounting holes for them to work o a 10" lift. Thank you for your question.

A: John,Thanks for the question.The difference between part # EXP72300B & EXP72301B is part # EXP72300B has the Pro Comp logo on it.Part # EXP72301B is plain with holes.You will need mounting kit part # 72101B to mount traction bars.

A: Mark,Thanks for the question.This will help stabilize your axle from axle wrap.The mount part # you will need is EXP72099B.

A: Franko from CT,Thanks for the question.Pro Comp Suspension Lateral Traction Bars part #s you will need is.EXP71000B is the bars & mounting kit is EXP711182B.

A: Thanks for the question Steven M, Unfortunately Pro Comp Traction Bars will only work on the short bed model.

A: Hello Kendall, The Pro Comp Suspension Lateral Traction Bars require the mounting hardware.

A: Thanks for the question. The Procomp traction bar bushings are going to come in the bracket bracket mounting kit part #. They are vehicle specific. Thanks you Answer box sales

A: Thanks for the question Doug Pro Comp Suspension Lateral Traction Bars EXP72400B You are going to have to modify these traction bars to fit on your Dual rear wheel truck. These are designed to work on the single rear wheel trucks. Thank you Answer box sales

A: Thanks for the inquiry Darren, the Pro Comp Suspension Lateral Traction Bars part # EXP72400B Im sorry but pro comp does not make them for your 1996 Ford f350.

A: Aaron,Thanks for the question.At this time the only traction bars I have is the Pro Comp.These traction bars are great quality & you will be very satisfied.

A: Bryan,Thanks for the question.The correct part # for the mounting kit is EXP71199B.This will work on your 98 Yukon.

A: Matt,Thanks for the question.Part #EXP72300B is the correct traction bar part # for your 2012 F 250.You wil also need EXP 72101B which is the mounting kit.

A: Yes the Pro Comp Suspension Lateral Traction Bars wild work on your 2006 Chevy 2500HD

A: Hello Powerstroke, Thank you for asking. The Pro Comp Suspension Lateral Traction Bars are not available for your application.

A: Dodgeramguy, thank you for your inquiry on the ProComp Suspension Lateral Traction bars. This kit will work if you have a body lift installed. With a body lift all you are lifting is the body from the frame. Doing this will not effect the axle. click here to order: http://jo.my/f9drcc.qrcode

A: Hello Pzilly, These Pro Comp Suspension Pro Comp Lateral Traction Bars are made specifically to eliminate axle wrap when driving or towing. You will need to also purchase a mounting kit EXP71200B to go with these bars.

A: Hello Dev. The Pro Comp Suspension Lateral Traction Bars, part # EXP72500B, does fit your application with a 5-6" lift, but being the quad cab, new holes will need to be drilled in order to mount the traction bars. You will also need the mounting kit which is provided in the following link. http://jo.my/z9cxqu Thank you

A: Joe,Thanks for the question.Part # EXP72400B will work perfect on your 2000 ford f350 crew cab shortbed with Pro Comp 6.5" lift .You will also need traction bar mounting kit part #EXP72099B.

A: Hello Zach, the Pro Comp Suspension Pro Comp Lateral Traction Bars will not work on your vehicle without modification to the mounts. These are designed for a 6" suspension lift. Thank you for your question.

A: Sorry pro comp doesn't make any traction bars for a Tacoma.

A: Hello Joe, the Pro Comp Suspension Pro Comp Lateral Traction Bars part# exp72400b will not work on your stock height vehicle without modification. Thank you for your inquiry.

A: Hello Cody, Pro Comp Suspension Pro Comp Lateral Traction Bars you would need EXP72300B and EXP72301B for your 2011 F-250 6.7 truck.

A: Hello Albert, the Pro Comp Suspension Pro Comp Lateral Traction Bars part# EXP72300B will work great with your 8" lift. Thank you for your inquiry.

A: Hello Tommy, the Pro Comp Suspension Pro Comp Lateral Traction Bars part# exp72400b will work great with your current suspension. Thank you for your question.

A: Hello Jack, the Pro Comp Suspension Lateral Traction Bars part# EXP72400B will fit with your Zone lift. Thank you for your inquiry.

A: Hello dave, Pro Comp Suspension Lateral Traction Bars part # EXP72500B will not work without modifications and none of the manufactures we carry make a direct bolt on for your 1990 Toyota Pickup.

A: Brian- Thanks for the question. The Pro Comp Suspension Lateral Traction Bars will not fit your 03 excursion with a 10 inch lift kit.

A: Hi SierraRunner The 74" bars are quite long for your application. i would recommend the 63" bars my self you should see were your frame mountings brackets fit on the frame and measure the length of the bars that would fit the best. bars are available in 42", 50", 63", 67", and the 74" lengths. Thank You

A: Hello diesel powerman, Pro Comp Suspension Pro Comp Lateral Traction Bars should take the EXp72099B mounting kit depending on what lift you have on your truck.