Pro Comp Leveling Kits

A: Yes, without a doubt. I have over 3200 miles with the kit installed in my personal vehicle and everything is spot on. Alignment is true, no clunking noises and handling has stayed the same as stock.

A: I have it on my 2022 tremor for the last 2 months. It rides like stock.

A: I’m running 275/75/16 ko2’s. They rub the inner fender liner towards the rear at full lock. 32” should be the max 

A: Check out the Pro Comp Nitro 2.25" Leveling Lift Kit - PN: EXP62180K (285/70/R17 = 32" Tire) https://www.4wheelparts.com/sku/Pro%20Comp%20Suspension/standard/62180.pdf

A: The level kit only lifts the front. So the bags should be fine.

A: No, this is designed for rear coils only.

A: V6 classic tradesman. I called and no one ever answers :/

A: What engine do you have? Please call our sales team with that information so we can get the correct leveling kit for your Ram Toll Free: 1-877-474-4821

A: Use PN: EXP924553B or EXP924553 or EXPZXR250001 These Fits 2017-2021 F-250 0”-2”

A: Absolutely! It will make your Lariat stand tall and proud!

A: Check out the Pro Comp 2.5 Inch Leveling Lift Kit (4WD models) Part # EXP62206

A: 2011-2016 F250/F350: FRONT (twin tube) w/ bracket # EXP922553B | w/o bracket # EXP924553B | REAR # EXP932008B || FRONT (monotube) w/ bracket # EXPPR2022 REAR # EXPPR2004. 2017 - UP F250/F350: FRONT (twin tube) w/ bracket # EXP921553B | w/o bracket # EXP924553B | REAR # EXP934005B || FRONT (monotube) w/ bracket # EXPPR2127 | REAR # EXPPR2129 PR2131

A: Pro Comp Suspension | Part Number: EXP62262K | 2008-2017 Ford F250 4WD Spacer Kit (3 1/2” Front Lift and 1 1/2”Rear Lift)

A: No mention of cutting bolts in the instructions: https://www.4wheelparts.com/sku/Pro%20Comp%20Suspension/standard/62206_INST.pdf

A: 4WD models only. 94-01 Ram 1500 4WD 94-13 Ram 1500 Mega Cab/ 2500/ 3500 4WD

A: 17” X 8.5” w/ +35mm offset 285/70/R17

A: Per the installation instructions: For this application, we recommend not exceeding 35” tall X 12.5” or 37” tall X 12.5”*. *NOTE: The use of 37” tires will slightly rub the radius arms at full turn. NOTE: Both tire fitments will require the inner fender to be pulled back to prevent rubbing (See pg. 10 for instructions).

A: The 62180 will give 2.25” of front lift. You can measure your front and rear height of your vehicle currently to see if the 2.25” lift will give you the desired lift/ look.

A: No, this will not fit your vehicle.

A: This kit is for 4WD trucks. Please call our sales line toll free at 1-877-474-4821 for 2WD options.

A: 18” X 8.5” w/ +35mm offset 285/70/R18

A: You should be able to fit 35s easily with this leveling kit and yes it will level the truck out nicely 

A: For front lift only: OE Wheel and Tire For full kit with big tire kit: 17” X 8.5” w/ +35mm offset 285/70/R17

A: Max tire size for this kit is 37".

A: You will need to call your local 4WP store to get a quote on install Toll Free: 1-877-474-4821 https://www.4wheelparts.com/stores/find-a-store

A: 62667 Spacer fits Gas and Diesel coil springs

A: Hello, We apologize for the delay, The image is a universal image, the kit only comes with front components. Feel free to call into the sales line to place an order. If you live near a store you can set it up for in store pick up. Sales & Support Toll Free: 1-877-474-4821 Phone Sales (PT) Monday - Friday: 5 a.m. - 7 p.m. Saturday: 7 a.m. - 3 p.m. Sunday: 8 a.m. - 2 p.m. Customer Service (PT) Monday - Friday: 6 a.m. - 5 p.m. Saturday: Closed Sunday: Closed

A: Hi Mario, Those Pro Comp 2.5 Inch Leveling Kit looks like it is for the front. For the rear you can use Daystar KT09111BK. https://www.4wheelparts.com/p/daystar-comfort-ride-2-inch-rear-leveling-lift-kit-kt09111bk/_/R-BKCG-KT09111BK If you have further questions you can contact our customer service center @ 877-474-4821 Hope this helps

A: Hi Justin, This Pro Comp 1.5 Inch Leveling Lift Kit will clear up to a 32 inch tire. 35 was a typo, and will be fixed.

A: Hi Lou, The Pro Comp 2.5 Inch Leveling Lift Kit does not call for a drop pitman arm. Contact our customer service center @ 877-474-4821 to speak with a salesperson about brake line brackets or new brake lines.

A: Hello Wes, Yes the Pro Comp Suspension 3 Inch Level Lift Strut Spacer will work with 2005 F150. Thanks for your question.

A: Hello Scott, With the Pro Comp Suspension 4WD Strut Spacer installed I would recommend backspacing to be between 4 and five inches. Thanks for your question.

A: Hello Jake, This will not fit your vehicle application. The correct fitment is Pro Comp Suspension 2 Inch Leveling Kit Part Number: EXP62159. Thank you

A: Hello JQ, The Pro Comp Suspension 2 Inch Level Lift Strut Spacer EXP62159 will fit your vehicle application provided it is a 4x4. This item will not fit your vehicle if its a 2wd. Thank you.

A: Hello Alex, No, you can not install a leveling kit on top of a spacer. The vehicle would never be properly aligned and the steering/CV angles would be harsh and fail. We suggest installing the 3" suspension lift and a body lift. Thank you for the question.

A: Hello zak and thank you for your question! Pro Comp Suspension 2.5 Inch Lift Strut Spacer will allow you to run 32" tires on your 4Runner with no rubbing issues.

A: Thanks for the inquiry JD, the Pro Comp Suspension 2 Inch Level Lift Strut Spacer part # EXP62159 the 295/70/18 should clear with no trimming on the factory wheels.

A: Hello Kevin, No, this will not help level the vehicle. We suggest installing a 1" rear coil spacer or upgrading coill springs to 1" taller. The will help level the vehicle out. Thank you for the question.

A: Thanks for the inquiry Austin, the Pro Comp Suspension 2 Inch Level Lift Strut Spacer part # EXP62159 this will work to level the truck W/O a lift, if you want to run a spacer and a suspension lift you'll have to run coil overs in the front.

A: Hello Ricko, The Part Number: EXP62667 comes with a track bar relocation and bump stops. The EXP62245 does not. Thank you for the question.

A: Hello Brad, Yes, this will fit your vehicle application. Thank you for the question.

A: Thanks for the inquiry Joey, the Pro Comp Suspension 2 Inch Coil Spring Spacer part # EXP61120 the stores charge $225.00 for install + $135.00 for an alignment.

A: Hello Motorvet2015, Yes, this will fit your vehicle application. Thank you for the question.

A: Thanks for the inquiry Matt, the Pro Comp Suspension 2 Inch Level Lift Strut Spacer part # EXP62159 will require -12 to 0 offset.

A: Hello AKE, The Pro Comp Suspension 2.5 Inch Lift Strut Spacer EXPPLT09116 is designed for work with the factory struts. Thank you.

A: Thanks for the inquiry Hungry Jack, the Pro Comp Suspension 2.5 Inch Level Lift Coil Spacer part # EXP62245 these are for a 4x4, try part # EXPPLF09101.

A: Thanks for the inquiry Hungry Jack, the Pro Comp Suspension 2.5 Inch Level Lift Coil Spacer part # EXP62245 here is a link to the instructions http://jo.my/3hrsz5

A: Thanks for the inquiry Steve retired sailor Pro Comp Suspension 2.5 Inch Coil Spring Spacer part # EXP62161 this kit will NOT require longer shocks.

A: Thanks for the inquiry Steve retired sailor Pro Comp Suspension 2.5 Inch Coil Spring Spacer part # EXP62161 this kit will NOT require longer shocks.

A: Hello Janet, Yes, the Pro Comp Suspension 2.5 Inch Lift Strut Spacer EXPPLT09103 will fit your vehicle application. Thank you.

A: Hello Cody, Installing the Pro Comp Suspension 2.5 Inch Coil Spring Spacer EXP62161 on top of a 6" lift will require a custom track bar bracket, sway bar links, brake lines, shocks and drop pitman arm. Thank you.

A: Hello Jason, Yes, the Pro Comp Suspension 2 Inch Coil Spring Spacer EXP61120 will fit your vehicle application. Thank you.

A: Hello Biscuit, You can install a 35x12.50 tire with very minor trimming. Thank you.

A: Thanks for the inquiry Luke, the Pro Comp Suspension 2.5 Inch Level Lift Coil Spacer part # EXP62245 extensions come with this kit to prevent you from spending money on new shocks, here is the better deal. http://jo.my/lqmd7u

A: Hello C, You should be just fine provided the wheels have a 4" to 5" backspace. Thank you.

A: Hello Shane, The Pro Comp Suspension 3 Inch Level Lift Strut Spacer can be installed with a few basic hand tools in a driveway with a floor jack. No special tools required. Thank you.

A: Hello P, I suggest the Pro Comp Suspension Nitro 2.25 Inch Lift Kit Part Number: EXP63165K and the Michelin light truck MS-2 275 / 70 R18 combo for your vehicle application. Thank you.

A: Hello J, The cheapest most complete option is the Pro Comp Suspension Nitro 3 Inch Lift Kit Part Number: EXP65205K for his vehicle. This kit will allow you to run a 285/50 tire size. We offer the Pro Comp Tires LT285/70R17, Radial Xtreme A/T Part Number: PCT57285 that will fit. Please note: When shopping for a wheel you will need one with a 4" backspace. Thank you.

A: Hello Eric, We do suggest upgrading to the front shocks to Part Number: EXPZX2025 and the rear shocks to Part Number: EXPZX2027. Thank you.

A: Skyler, yes with this kit you can run 35x12.5 thanks for your question.

A: Tristen, if your trying to fit 35" tires go with the 3" spacer if you want to level the truck go with the 2.5 spacer. Hope this helps thanks for your question.

A: Thanks for the inquiry Robert, the Pro Comp Suspension 2 Inch Level Lift Strut Spacer part # EXP62159 normally our stores charge $225.00 + (an alignment is recommended) to install a leveling lift.

A: Thanks for the inquiry Fairbanks, the Pro Comp Suspension 2.5 Inch Level Lift Strut Spacer part # EXP61170 is incorrect you'll need to run part # EXP61240.

A: Pavment princess, this kit will not require a specific offset. The max tire size is 35x12.50 and the tire you have 285/65r20 will fit. Thank you for the question.

A: Hello Z-Dodge, Yes, this will fit your vehicle application. Longer shocks are not needed.

A: Hello AJ, The Pro Comp Suspension 2.5 Inch Level Lift Coil Spacer comes with all needed brackets to fully install on your vehicle application. Thank you.

A: Hello This is a front leveling kit there is no need for a rear driveshaft spacer. This kit only lifts the front to level it out. Thanks

A: Hello Paul, Thank you for asking. You can run 35 inch tall tires but you are going to rub like crazy. It would be a safer bet to run 33"s.

A: Hello Rich, the Pro Comp Suspension 2.5 Inch Coil Spring Spacer part# EXP62161 does not require a longer shock for the front. Thank you for your question.

A: Unfortunately no we would not recommend stacking a Pro Comp Suspension 2 Inch Lift Strut Spacer on top of another leveling kit. Hop[e this helps!

A: Unfortunately no the Pro Comp Suspension 3 Inch Level Lift Strut Spacer will not be enough lift to fully clear a 325/60r18. We would recommend a minimum of 4" of lift to clear a tire that wide. Hope this helps!

A: Hello Allen, the Correct pro comp level lift spacer kit for your vehicle would be Exp61180. Thank you for your inquiry.

A: joe from florida,Thanks for the question.Part #EXP61170 Pro Comp Suspension 2.5 Inch Level Lift Strut Spacer only works on a 4x4.This will not work on your truck.

A: joe from florida,Thanks for the question.This part fits a 4x4 only.

A: Yes the steering wheel will be off.

A: Hello Sam and thank you for your question! Pro Comp Suspension 2 Inch Lift Strut Spacer is made for a Nissan Titan. Pro Comp does not make any type of lift for Infiniti's.

A: Hello Red and thank you for your question! Pro Comp Suspension 2.5 Inch Level Lift Strut Spacer part number EXP61170 is the correct level kit for your 2007 Dodge Ram 1500 2wd.

A: Thanks for the inquiry fordkisskrazy, the Pro Comp Suspension 2.5 Inch Level Lift Strut Spacer part # EXP61170 is a true 2.5 inch lift.(strut spacer)

A: Hello Lou, Thank you for asking. The Pro Comp Suspension 3 Inch Level Lift Strut Spacer should not cause any issues with your ball joints, same thing with the 2.5" kit.

A: .

A: Hello Chris, Thank you for asking. On a 2014 F150 with a level kit, you should be able to clear up to a 33x12.50 on either kit. Usually a 285 tire will give you less issues.

A: This part number is for a dodge. But the spacer for your F150 goes on top of the strut so you do not need new shocks. The best thing to do is measure the front to the rear to see if it will be lever by raising the front 3". We can always sell you a block for the rear.

A: Yes this will fit your 4 Runner and you don need longer shocks because it installs on top of your strut.

A: Hello Rob, the factory struts will usually last on average about 60-80k miles before they start having issues. Thank you for your inquiry.

A: Hello Tall trucker, the Pro Comp Suspension 3 Inch Level Lift Strut Spacer part# EXP62200 will fit your 01 Ram 2500 diesel. Thank you for your inquiry.

A: Hello Rickaroo, Pro comp does offer a set of torsion keys that will fit your vehicle part# Exp63200. These keys will allow you to clear a 285/75/16 tire no Problem. Thank you for your inquiry.

A: Hello John, Thank you for asking. You are correct, in addition to raising your Jeep it will level it out as well.

A: Thanks for the question louie, no. if you instal a spacer on top of the lift it will throw the front geometry out of wack and you wont be able to align it.

A: Balboa,Thanks for the question.Part # EXP61240 will fit your 2001 dodge ram 2500 cummins 4wd.

A: Hello Ben and thank you for your question! Pro Comp Suspension 2 Inch Level Lift Coil Spacer would bring your Range Rover up 2" but Pro Comp does not make a level kit for a Range Rover.

A: Hello Harry, Thank you for asking. The Pro Comp Suspension 2.5 Inch Coil Spring Spacer are for 2011-2013 F-250's. The Only kit we have is by Old Man Emu 1.5 inch lift which requires multiple items. You will need to call our sales department for a price.

A: Hello Duke, These Pro Comp Suspension 1.5 Inch Level Lift Strut Spacer are not for your truck. These are for a Chevrolet. As of right now we do not have a listing for a 2015 Toyota 4Runner.

A: Hello Jamie, Thank you for asking. I recommend you speak to the tech guys at Pro Comp about this. (800) 776-0767

A: Thanks for the question bret, Its oviously wrong on our site, thanks for bringing it to our attention.

A: Hello Al, Thank you for asking. Here is the correct link to the level kit you need. http://jo.my/l7j6fe Longer shocks are recommended and you will need an alignment after install.

A: Hello Rick43066, The Pro Comp Suspension 2 Inch Lift Strut Spacer come with all necessary hardware.

A: Hello Chad and thank you for your question! Pro Comp Suspension 2 Inch Coil Spring Spacer part number EXP61120 is for a Dodge Ram truck. None of the manufactures we carry make a level kit for your 2005 Trailblazer.

A: Hello Beau, Thank you for asking. The only thing you will need to do after installing the Pro Comp Suspension 2.5 Inch Lift Strut Spacer is to get a wheel alignment.

A: Thanks for the inquiry crazyweb, the Pro Comp Suspension 2.5 Inch Lift Strut Spacer part # EXPPLF09111 will allow for 35's but will scrub a bit at full turn.

A: Hello Bobby, Thank you for asking. You will have to measure center of wheel to bottom of the fender in the rear and the front. Once you get your measurement add 1.5 to the front and that is where the front end will sit.if you don't think 1.5" will be enough, we do offer a 2.25" spacer part# EXP63235

A: Hello Edgar. The Pro Comp Suspension 2.5 Inch Lift Strut Spacer, part # EXPPLT09116, will fit the 15' Tacoma. Thank you