Pro Comp Stage I Lift Kits

A: Instructions: https://www.4wheelparts.com/sku/Pro%20Comp%20Suspension/standard/51070_K1176_INST_7.22.21.pdf

A: No 17" or 18" IMPORTANT!: The factory rims and factory spare tire cannot be used with this lift kit. 17"/18" Spare can only be used for the rear wheels only. If a flat tire occurs on the front, the 20"+ rim from the back will need to be placed on the front.

A: 2.0 PRO-M MONOTUBE SHOCK is a upgrade shock option: (2) Front: EXPPR2080 | (2) Rear: EXPPR2012

A: Replacement Item Number (2) EXP925518B (ES9000 Rear Shock) | Replacement Item Number (2) EXP622053 (ES6000 Front Shock)

A: The truck is riding like a brick. There is no bounce. When it hits a bump, it jars the whole truck and feels like I hit a cement block without suspension. The shocks are brand new, the wheels and tires are a year old and the truck doesn't get driven daily. I need help with trying to find a softer ride or I'm going to have to remove this lift kit.

A: Need understanding what is meant by “riding rough”? Is the vehicle not getting up/down suspension movement? Is suspension hopping/ bouncing when going over bumps? After going over bump, does suspension settle in one bounce? Or 2-4 bounces? Please call our sales team for further assistance Toll Free: 1-877-474-4821

A: PN: EXP921510B = Extended Length: 21.8 inches | Collapsed Length: 13.1 inches || PN: EXP929500B = Extended Length: 29.8 inches | Collapsed Length: 17.3 inches

A: Yes, Front coil springs.

A: This is a *complete kit. It will re use your current struts from the front and use blocks in the back. Wheels/tires will fit. I actually purchased this kit because I went to a bigger wheel/tire size. From P265/70/R18 —> 35x12.5x8. Important note, turning radius suffers from this lift…

A: PN: EXPK4020T (Coils - Gas Engine) Use PN: EXPK4021T (Coils - Diesel Engines)

A: The Pro Comp 6 Inch Stage 1 Lift Kit with Twin Tube Shocks - K5156B Fits: 2015 - 2020 Toyota 4Runner Try the SKU # R/C76630 Brand Rough Country (3 INCH LIFT KIT | TOYOTA 4RUNNER 2WD/4WD (2003-2022))

A: Rear U-bolts will be different. You will need to take measurements of diameter of axle and overall length with all rear lift parts installed to get correct U-bolts measurement needed. Sales & Support - 855-554-2400

A: 5-8 hours | Depends on if power tools and /or lifts racks is used, also depends on skill level of installer.

A: Please contact us regarding the Pro Comp 6" Lift Kit with Pro-M Shocks - K1143M Sales & Support - 877-474-4821

A: 2020-2019 Ram Trucks - This kit * Requires 22-inch or larger rims

A: Yes we install everything we sell. https://www.4wheelparts.com/stores/find-a-store

A: I would recommend the Firestone Ride-Rite | Part Number: FIR2445 - Rear Kit

A: Please call us, Sales & Support - 877-474-4821 these are not online - Front: 917510B | Rear: 924509B

A: Yes

A: The Pro Comp 4" Lift Kit with Pro-X Shocks - K5054T - The installation will require cutting. Installation Instructions will be loaded soon.

A: Kit will use 7” coil springs. The Knuckles and drop brackets will keep the geometry to allow for use of the 7” coil springs.

A: Please Note: • Front end and head light realignment is necessary! • Speedometer and ABS recalibration will be necessary if larger tires (10% more than stock diameter) are installed.

A: If you run a 37" tire with the Pro Comp Suspension 7 Inch Lift Kit with ES9000 Shocks on your GM 1500 series truck it will rub. For this application, we recommend a wheel not to exceed 8” in width with a minimum backspacing of 4” must be used. Additionally, a quality tire of radial design, not exceeding 35” tall X 12.5” wide is also recommended. Please note that the use of a 35” X 12.5” tire may require fender modification/trimming. https://www.4wheelparts.com/sku/Pro%20Comp%20Suspension/standard/51084B_K1078B_INST.pdf

A: 2.5” lift shocks for dual front - Inner Shock (Short) | PN: EXP921500 (Included in kit K1021) | Outer Shock (Long) | PN: EXP922500 (Need to Purchase)

A: Call us: 800-421-1050 to order replacement rear shocks ref: "EXP924750B."

A: 3” BLOCK | Installation Instructions https://www.4wheelparts.com/sku/Pro%20Comp%20Suspension/standard/51084B_K1078B_INST.pdf

A: 4WD models only. Try Part Number: R/C52830 (97-03 Ford F-150 2WD models)

A: Yes, 2017 Ram 2500 Power Wagon

A: The kit is designed to sit the vehicle level, but the coils springs do sit taller than 3” when installed. The vehicle will need be driven 500 miles or more to allow the coils to settle in to the vehicles weight.

A: 06 Silverado has front and back shocks. Please call our sales team for more information Toll Free: 1-877-474-4821

A: The Pro Comp 6 Inch Stage 1 Lift Kit with Twin Tube Shocks - K5156B FITS: 2020-2015 Toyota 4Runner Try: Rough Country 2.5" Nissan Suspension Lift Kit - 86731 or ReadyLift 2.5 Inch SST Lift Kit - 69-4510

A: Tire and wheel choice is crucial in assuring proper fit, performance, and the safety of your Pro Comp equipped vehicle. For this application, we recommend an 18” X 8” wheel with a maximum backspacing of 4 3/4”. Additionally, a quality tire of radial design, not exceeding 35” tall X 12.5” wide is recommended. Please note that the use of a 35” X 12.5” tire may require fender modification. Installation of larger wheels may be possible. Be sure to check fit all wheel and tire combinations before purchasing and installation.

A: This fits 2005-2020 Hilux.

A: Yes it will.

A: 99-04 Excursion 2WD 6” Gas K4022B 6” Diesel K4130B

A: Tire information: • This kit is designed for the use of 35” diameter tires or smaller. If 35” tires are to be installed, it is recommended to use 35” x12.50” tires on an 8”-9” wide wheel with an offset of 0 to 12mm+. • If 33” tires or smaller are to be installed, the installation of the bump stops can be omitted to allow for more compression travel. • A wheel with a backspacing of 4.75” is required with installation of this kit. • For Rubicon models, 37” diameter tire installation may require trimming to fit. • For Sport models, 37” diameter tire installation will require extensive trimming to fit.

A: In our instructions we recommend the following tire and wheel set up for this kit: For this application, we recommend a 17” X 8” non hub-centric wheel with a maximum backspacing of 4 1/2” (PN 8089-7883). Additionally, a quality tire of radial design, not exceeding 33” tall X 12.5” wide tire (PN 27033) is recommended. Installation of larger wheels may be possible, but must not exceed 5” of backspacing. Be sure to check fit all wheel and tire combinations before purchasing and installation.

A: Yes, this will work with the Kinetic Dynamic Suspension System (KDSS) on the 2015-2020 Toyota 4Runner

A: Knuckles are sold in pairs in box EXP57597B-2. You will need to call in to purchase: Toll Free: 1-877-474-4821

A: 4WD models only.

A: You would need to contact your local 4WP store to get a quote on installation.

A: Due to differences in manufacturing, dimensions and inflated measurements, tire and wheel combinations should be test fit prior to installation. Tire and wheel choice is crucial in assuring proper fit, performance, and the safety of your Pro Comp equipped vehicle. For this application, we recommend a wheel not to exceed 8” in width with a minimum backspacing of 3.5” must be used, additionally, a quality tire of radial design, not exceeding 35” tall X 12.5” wide is also recommended. Please note that the use of a 35” X 12.5” tire may require fender modification. Violation of these recommendations will not be endorsed as acceptable by Pro Comp Suspension and will void any and all warranties either written or implied.

A: Spacers sitting on OEM struts will yield 6” of lift in front.

A: No it will not fit.

A: Yes it will fit your 2WD 2015 PreRunner.

A: 2.5 degree aluminum shim

A: No this will not work.

A: The K4021B is complete for the 99-04 2WD with Diesel engines.

A: 4WD models only.

A: You will need to contact your local 4WP store to get a quote on installation: https://www.4wheelparts.com/stores/find-a-store

A: Yes it will fit Eco-Diesel, as long as it has base suspension

A: Kit will lift front 4”, rear 2” to sit vehicle level.

A: Yes 

A: Sway Bar bushings 45359 Qty 2 Hardware Pack 90-6085 Qty 1 Hardware Pack 90-6148 Qty 1

A: The kit is designed to make vehicle sit level after kit is installed.

A: Yes

A: Yes, the front will work. The rear will not.

A: Cannot convert 4” to 6”. The 4” and 6” have different drop down parts. You would need to buy a complete new 6” kit.

A: We need more information on the vehicle you are working on to be able to assist you from here. Please call our sales team with more information on your vehicle: Toll Free: 1-877-474-4821

A: Yes it will work.

A: This lift kit includes everything needed to lift your Tacoma.

A: It fits: 1999 Ford F-250 Super Duty Lariat 1999 Ford F-250 Super Duty XL 1999 Ford F-250 Super Duty XLT

A: Top U-bolts in picture are the semi-round.

A: Per our instructions on this kit: Due to differences in manufacturing, dimensions and inflated measurements, tire and wheel combinations should be test fit prior to installation. Tire and wheel choice is crucial in assuring proper fit, performance, and the safety of your Pro Comp equipped vehicle. For this application, we recommend a 16” or 17” wheel not to exceed 9” in width with a maximum backspacing of 4-5/8” can be used. Also an 18” wheel not to exceed 9” in width with a maximum backspacing of 5” can be used. A quality tire of radial de-sign, not exceeding 35” tall X 12.5” wide is also recommended. Please note that the use of a 35” X 12.5” tire may require trimming of the front valence. Violation of these recommendations will not be endorsed as acceptable by Pro Comp Suspension and will void any and all warranties either written or implied.

A: Yes it comes with coil springs. No it does not come with the pitman arm. Two pitman arm options: IF PRODUCED BEFORE 4/99 - USE EXP FD400 IF PRODUCED AFTER 4/99 - MUST CHECK OEM PART #: YC35-3590-DA.........FD400 YC35-3590-DB.........FD600 It comes with ES9000 shocks. For pricing, you would need to call our sales team Toll Free: 1-877-474-4821

A: Yes, but using a 2” F250/F350 kit on an Excursion will yield 4” of lift. The steering will not be correct.

A: Shocks in this kit are part number EXPZX2109.

A: Max Tire Size (Inch): 35"x12.50" Wheel Size Range (Inch): 17" or larger Wheel Width Range (Inch) :8"- 10" Min-Max Backspace (Inch): 4" - 5"

A: The front is same, the rear u-bolts will be different.

A: Pro Comp coil over springs rates are est 10% over OEM rates. Somewhere in the 600 lbs

A: Per installation instructions: The OE wheels and tires including the OE spare wheel and tire cannot be used with this lift kit. Body and or fender modifications may be required to properly install the maximum tire diameter and maximum wheel width listed. For this application, we recommend a 17”, 18” or 20” or larger wheel not to exceed 9” in width. 17” rims must not exceed 4.5” of backspacing and 18” and 20” rims must not exceed 5” of backspacing. A quality tire of radial design, not to exceed 305/60 R18, 305/55 R20, or 285/70 R17. Fender modification is required when using a tire 32” tall or larger.

A: No it will not fit.

A: Yes it will fit.

A: 51212 SPRING RATE...274 LBS/IN

A: No, the u-bolts are different.

A: Per the instruction file: For this application, we recommend a wheel not to exceed 10” in width with a maximum backspacing of 5 3/4” must be used. Additionally, a quality tire of radial design, not exceeding 38.50” tall X 14.50” wide is also recommended.

A: The total 6” lift is achieved from the combination of struts spacer and cross member lowering.

A: Per the instructions: For this application, we recommend a wheel not to exceed 8” in width with a minimum backspacing of 4” must be used, additionally, a quality tire of radial design, not exceeding 35” tall X 12.5” wide is also recommended. Please note that the use of a 35” X 12.5” tire may require fender modification. Violation of these recommendations will not be endorsed as acceptable by Pro Comp Suspension and will void any and all warranties either written or implied.

A: Yes , the 99-04 F250/F350 2WD applications use a Twin I beam similar to the 81-96 F150. K4021B is correct for 99-04 F250 2WD.

A: The K1047 kit is not recommended for 98-99 GM1500 4WD vehicles with the Auto Track NP246 transfer case.

A: Per the installation instructions: For this application, we recommend a 17” wheel not to exceed 9” in width with a maximum backspacing of 5-1/2” can be used. An 18” wheel not to exceed 9” in width with a maximum backspacing of 5-3/4” can be used. Also a 20” wheel not to exceed 9” in width with a maximum backspacing of 6-1/8” can be used. A quality tire of radial design, not exceeding 35” tall x 12.5” wide is also recommended. Please note that the use of a 35” x 12.5” tire may re-quire trimming of the front valence.

A: Mike, this lift kit will not fit a 4x4 model. It is for 99-05 Chevrolet Silverado 2WD with one piece rear drive shaft & 05 & 06 C1500 with coil spring front end.

A: Yes this will work for your 1993 F150.

A: New driveshafts are not required. New track is not required, kit comes with track bar drop.

A: No it will not. It is for 4WD models only.

A: The front part of the kit will be direct bolt on. The rear part of the kit may require a different U-bolt to be used with the Dually rear axle.

A: Yes it will fit.