Pro Comp U-Bolt Kits

A: yes it is

A: Yes, 2.5" is the interior of the U Bolt.

A: U-bolt lengths are usually adequate for stock and aftermarket leaf spring packs. Give us a call Sales & Support - 877-474-4821

A: U-bolt lengths are usually adequate for stock and aftermarket leaf spring packs. Give us a call Sales & Support - 877-474-4821

A: Package of two.

A: Sold as Pairs

A: Pro Comp U-Bolt Kit - EXP50113 | Tread Size: ½”-20 | ID width: 2.90” | ID length: 9.875” | Bend: Round

A: No, unfortunately the 2008 Ram 1500 Axle diameter is 3.6875". For U-Bolts use: Length Order 9" EXP13-90165A x4 10.125" EXP13-90191A x4 You can also call our customer service line at 1-855-554-2400 for further assistance before placing your order.

A: Kit comes with: 1 U-bolt 2 washers 2 nuts

A: U-bolts are 9/16"-18 X 2.500" X 10.00" The 2.5” width will work. The length need to be checked to see if will work for your application.

A: 50055 kit comes with: 4) U-bolts - 1/2"-20 X 2.75" X 7.50" 4) Nuts 8) Washers

A: The 50126 is designed for Blocks 2”-3”. For 4”-5.5” Blocks, you will need 4) EXP 13-90347A. This will be 4 Individual U-bolts with nuts and washers.

A: Our tech team would prefer you call them to assist you further: 800-776-0767

A: This is one u-bolt. We sell a complete kit of 4, part number is EXP50190

A: U bolt: Thread size ID width ID length Bend 3/4”-16 3.08” 16.25” Square Included : 4 U bolts with washers and nuts

A: Hello Thom Yes it does have the one larger u-bolt for the passenger side of the axle. Thanks

A: Hello Zack, The Pro Comp Suspension U-Bolt Kit EXP50010 only fits the front of the 1972 to 1986 Jeep CJ. Thank you.

A: Hello lc, The U-Bolts are 1/2" - 20 x 2.75" x 7.50" Thank you.

A: Hello Johnathan, the Pro Comp Suspension U-Bolt Kit part# EXP50126 will fit your Tacoma with a 3-4" block. Thank you for your inquiry.

A: Hello Johnathan, the Pro Comp Suspension U-Bolt Kit part# EXP50126 will fit your Tacoma with a 3-4" block. Thank you for your inquiry.

A: 1/2"-20 X 3.250"X 6.75" looks like 6.75"

A: Hello Mer, Thank you for asking. The Pro Comp Suspension U-Bolt Kit part# EXP50365 are 9/16"-18 X 2.40" X 8.09" in a 1/2" diameter u-bolt we do not list one that is 11" long.

A: Luke- Thank you for your question. To find the correct shock for your application I will need more information. I have sent you an email from my company email. Please look for it and we can help find you the correct shock.

A: Hello The kit comes with 4 u-bolts and 8 nuts and washers

A: Hello LUKE and thank you for your question! Pro Comp Suspension U-Bolt Kit is made for your Toyota.

A: Hello Froggy423, Thank you for asking. The Pro Comp Suspension U-Bolt part# EXP13-90380E are not for your 2011 F-150. The correct ones are not listed on our website, you will need to call in if you'd like to order. You need part# EXP13-90390 x4pc and EXP20-65302 x1 pc

A: Hello Danny and thank you for your question! Pro Comp Suspension U-Bolt Kit are the correct u-bolt kit for a 6" lift kit.

A: Thanks for the question Fred Pro Comp Suspension U-Bolt Kit EXP50438 These will not work for your application. you are going to want to get this part # EXP13-90190 (qty 4) and EXP20-65471 (qty 1) Thank you Answer box sales

A: Thanks for the question Daniel Pro Comp Suspension U-Bolt Kit EXP50178 - http://jo.my/o51k22 These are not going to work for application. You are going to want to order this part EXP50243. Thank you Answer Box Sales

A: hello The u-bolt is 9.88 inches long inside of curve to the top of threads.

A: Thanks for the question JB Pro Comp Suspension U-Bolt Kit, EXP50126 No, these will not fit the application. Thank you BJ Answer Box Sales

A: Hello David, the Pro Comp Suspension 5.5 Inch Rear Block With U-Bolt part# EXP58555 comes with blocks an u-bolts for both sides. Thank you for your question.

A: Chris- Thanks for the question. The Pro Comp Suspension U-Bolt Kit will not fit your 02 ram 1500

A: Hello Soccer_boy248, Thank you for the question. Yes, the Pro Comp Suspension U-Bolt Kit Part Number: EXP50055 will fit your vehicle application. The u-bolts are designed for a leaf spring, spring plate and 3" lift block.

A: Spyder- Thanks for the question. Pro comp only make U bolt kits for 86 and up toyota pickups.

A: Pipe- Thank you for your question. The Pro Comp Suspension U-Bolt Kit measure .563 inch in diameter 8.5 inside length 3 inch in width.

A: Jon- Thank you for your question. The Pro Comp Suspension 5.5 Inch Rear Block With U-Bolt Kit only comes in a kit with U bolts. The FAB TECH 5 inch block comes as blocks only, it can be found here http://jo.my/o8nqdu

A: Scandell- Thank you for your question. The Pro Comp Suspension 5.5 Inch Rear Block With U-Bolt Kit u bolts do fit over the factory overloads and spring pack. Yes the block has the bump stop contact pad.

A: Dane- Thank you for your question. The measurements of the Pro Comp Suspension U-Bolt Kit are diameter is .625 inch the length from the inside of the throat to end is 7.5 inches the width is 2.75 inches

A: Hello Luedke, Thank you for the question. The Pro Comp Suspension U-Bolt Kit EXP50010 is for One U-Bolt, Two Thick Flat Washers and Two Tall Nuts

A: Truck Nut- Thank you for your question. The Pro Comp Suspension U-Bolt Kit is designed to work with a 2 to 6 inch lift block. The issue you will run into with this kit is that there will not be enough threads to run the nut all the way down. For your add a leaf your stock u bolts should be long enough.

A: Hello Dan, The Pro Comp Suspension 5.5 Inch Rear Block With U-Bolt Kit EXP58555 will not fit your vehicle application. We do offer the Tuff Country Axle Lift Blocks Kit T/C97063 that do fit your application. Thank you for the email.

A: Hello Tracy, The Pro Comp Suspension U-Bolt Kit EXP50165 comes with 4 u-bolts, 8 flat washers and 8 nuts. Thank you for the email.

A: Coy- 4 U-bolts come in each Pro Comp kit.

A: Hi Ollie There are two U-Bolt kits that could be used with your 1996 Jeep XJ depending on the rear axle that came in your Cherokee. if your Cherokee has the Dana 35 rear with the 2 3/4" axle tubes you will use the EXP50055 U-Bolt kit http://jo.my/7afj5u If your Cherokee has the Chrysler 8 1/4 rear axle with the 3 1/4" axle tubes you will require kit EXP50050 http://jo.my/tgn5n3 Rubicon Express makes the front coil spacer in a polyurethane that deadens road noise for the front http://jo.my/hklepe 4WD makes a nice set of rear shackles with grease able bushings that will provide the 1" rear lift you are requesting http://jo.my/iz247e The Tulsa store only has the rear U-Bolt in stock for the 8 1/4 axle and that is it. you can buy on line and ship to store but that will not get there Friday you could order on the phone and next day ship for Friday home delivery before 1 Texas time Thank you

A: Dewey, The ProComp Suspension U-Bolt Kit EXP50165 are 8" in length.