Rubicon Express Track Bars

A: PN: R/ERE3791 = 9/16” ID bolt hole | PN: R/ERE3791-1 = ½” ID bolt hole

A: Use the Rubicon Express Super-Flex Assembly - PN: R/ERE3791

A: This model does not fit right hand drive. Try iron rock offroad

A: Rubicon Express only has LHD.

A: No it is not required. However it is suggested.

A: Part Number: RE1665 states - This drop bracket is required for installation of RE1660

A: I guess I don't see why not if the threads match up. I love the track bar it works awesome. Just add a little red lock tight to the nut end.

A: The RE1600 was not designed with using a tie rod, so I don't know if there is a tie out available to fit the thread pitch of the bar.

A: Please give us a call (866) 533-7706

A: The R/ERE1660 was not tested with other mfg kits parts. Per installation instructions, R/ERE1660 must be used with RE1665 bracket.

A: No it will not fit.

A: Hello Wesley, Just heard back with these specs:
Compressed: 33.1” Extended: 34.32” Sleeve (RM10045) ID: 0.515” Supeflex Ball (RM13562) ID: 0.500”
Thanks for checking us out.

A: It is bent similar to the stock one. 

A: The rod end Jam Nut is a 3/4” Left hand. The part number is SJNL12.

A: Not sure what you mean by replaces it. This part number fits 07-18 JK Wranglers with 0-3.5” lift. If there is something else you are looking for, please call our support line Toll Free: 1-877-474-4821

A: Please contact our sales team to get the hardware kit you need: Toll Free: 1-877-474-4821

A: That would be a service item. Please call our sales line to order Toll Free: 1-877-474-4821

A: Those are 2 different track bars based on your lift height. One fits 3.5-4.5" lift and the other is 4.5-7.5"

A: Hello Shepler, Yes, this will fit your vehicle and lift height. You will also need the purchase the Rubicon Express Track Bar Bracket Front XJ/ZJ 4.5"-7.5" Part Number: R/ERE1665 to install the track bar itself. Thank you for the question.

A: Hello Chris, Unfortunately no one offers an adjustable track bar for vehicles will less than 3" of lift at this time. We do offer relocation brackets that will fit.

A: Hello Zig, You will need to remove the track bar bracket and install just this unit. It will fit your vehicle. Thank you for the question.

A: Hello jeeperjack, This unit will not screw in lower than a 4.5" lift height. I recommend the installation of a 1" coil spring spacer to help eliminate the sag in your lift. Then this track bar will fit. Thank you for the question.

A: Hello ColoradoLJ, This track bar will use the factory mounting brackets. You will not need a relocation bracket until the lift height is 5" or taller. Thank you for the question.

A: Thanks for the inquiry divit250r, the Rubicon Express Track Bar Adjustable Front TJ/LJ/XJ/MJ/ZJ 3.5"-4.5" part # R/ERE1600 "REPLACEMENT PARTS KMX-L12...HEIM JOINT, FRAME END RE1684...HARDWARE PACK, BOLT, NUT, AND SPACERS, FRAME END RE1685...BUSHINGS AND SLEEVE PACK, AXLE END"

A: Hello ZIP and thank you for your question! Rubicon Express Track Bar Adjustable Front TJ/LJ/XJ/MJ/ZJ 3.5"-4.5" works for a TJ with a 3.5" to 4.5" lift.

A: Hello Oliver Yes this will work on your XJ as long as it is a true 3 inches of lift. They say 3.5 because that is the size lift Rubicon Express makes for your Jeep XJ. Thanks

A: Thanks for the inquiry oliver, the Rubicon Express Track Bar Adjustable Front TJ/LJ/XJ/MJ/ZJ 3.5"-4.5" part # R/ERE1600 this will work with your 3 inch lift.

A: Hello James, The Rubicon Express Track Bar Adjustable Extreme-Duty Front XJ/ZJ 4.5"-7.5" R/ERE1660 is 1 3/8 in x 3/16 in wall 4130 chromoly. Thank you.

A: Hello Gerry, The Rubicon Express Adjustable Extreme Duty Front Track Bar R/ERE1680 will fit a 3.4" to 4.5" lift kits. Thank you.

A: Hello Pete, You will need the Rubicon Express Front Track Bar Bushing Kit Part Number: R/ERE1685. Thank you.

A: Thanks for the inquiry Phil, the Rubicon Express Adjustable Front Track Bar part # R/ERE1673 replacements see here KMX-L12...HEIM JOINT, FRAME END TAKES 2 RM10242 MISALIGNMENT SPACERS RE1688...BUSHINGS AND SLEEVE PACK, AXLE END"

A: Hello Crashtnburnt, Thank you for asking. Unfortunately we do not have those dimensions on hand, that would be a question for the manufacturer. Rubicon Express tech is 866-533-7706

A: R/ERE1665 bracket $79.99

A: Hello bob and thank you for the inquiry on the Rubicon Express Adjustable Rear Track Bar. I have submitted and e-mail to the manufacturer, and hopefully we will see something posted here soon!!!

A: Hello Bob, The Rubicon Express Adjustable Rear Track Bar comes complete and ready to install.

A: Hello JR and thank you for your question! Rubicon Express Track Bar Adjustable Front TJ/LJ/XJ/MJ/ZJ 3.5"-4.5" bushing kit runs $10.99.

A: Must be used with #R/ERE1675 track bar bracket with this bracket you will be all set. Thanks

A: Hello kruketfoot, the Rubicon Express Track Bar Adjustable Extreme-Duty Front XJ/ZJ 4.5"-7.5" part# R/ERE1660 is completely rebuildable. We carry the parts here and they will run you about 43$. Thank you for your inquiry.

A: Hello Gary, the Rubicon Express Track Bar Adjustable Rear TJ/LJ 3.5"+ part# R/ERE1620 is serviceable. The parts you will need are quantity 2 R/ERM10240, 1 KMX-L12, and 1 R/ERE1686. Please contact our sales team to order these parts. 800-421-1050. Thank you for your inquiry.

A: Jonathan,Thanks for the question.Part # R/ERE1600 will work perfect for your 85 Cherokee with 4.5" of lift.This will fix your problem that you are having now.We do have this part on shelf ready to go.

A: Hello PFDSWolfman, The Rubicon Express Adjustable Front Track Bar will not work on a Jeep JK 2007-2014 with 2.5"lift. You will need part # EXPJTB402 this will work with a 2-6"lift. http://jo.my/jp2ld7

A: Hello Chris, the Rubicon Express Adjustable Rear Track Bar part# R/ERE1690 has a bushing on one end and a heim on the other. The bushing side attaches to the frame. Thank you for your inquiry.

A: Hello Remlap, The Rubicon Express Adjustable Rear Track Bar is set to work with 3.5"or larger. So you would have to remove the relocation bracket and install the Rubicon track bar with the correct adjustments.

A: H Jimfro75 'The relocation brackets are used to maintain a flatter angle on the track bar which will help limit the amount of distance that the track bar needs to push the axle out the side of the vehicle when the suspension needs to move. this push will give you a squirm or loose feel on the road. Keeping the track bar as flat as possible lessens this feel and makes the vehicle more stable on the road. Thank You

A: Hello Bryan, the Rubicon Express Track Bar Adjustable Front TJ/LJ/XJ/MJ/ZJ 3.5"-4.5" part# R/ERE1600 does not require a special bracket. This track bar bolts in to existing mounts. Thank you for your inquiry.

A: Eric- Thanks for the question. The Rubicon Express Track Bar Adjustable Extreme-Duty Front XJ/ZJ 4.5"-7.5" is bolt in but requires the R/ERE1665 and that your jeep be at a min of 4.5 inches of lift.

A: Hello racksandquacks, Thank you for the question. The bushing mounts to the axle side and the adjustable heim joint mounts to the frame side.

A: Hello Rodo, No one offers a replacement track bar for non lifted Jeeps. The replacement for a non lifted Jeep is a factory track bar.

A: Fero- Thanks for you question. The Rubicon Express Adjustable Extreme Duty Front Track Bar does require the RE1675 bracket.

A: Hello sasquatch, Thank you for the question. I would suggest adjustable track bars front and rear on your vehicle.

A: Matt- Thanks for the question. Yes the Rubicon Express Track Bar Adjustable Extreme-Duty Front TJ/LJ 4.5"-7.5" uses the standard small joint race.

A: Jeepmackan- Thanks for your question. The flex joint a the top end of Rubicon Express Adjustable Extreme Duty Front Track Bar is rebuild able but most often just needs to be adjusted. The rebuild kit with tool is part number r/ere4450. I would recommend you try adjusting it before you purchase the kit. Remove the set screw and spin the lock nut out. This will allow you to take out the outer bushing and the inner ball. Remove all old grease and clean. Re grease the inner bushing with a thin coat of grease, coat the ball with a THIN coat of grease and re install. Reinstall the outer bushing and lock collar and tighten the until the ball does not move freely. Hope that helps.

A: JeepMackan- Thanks for the question. The replacement bushing for the Rubicon Express Adjustable Extreme Duty Front Track Bar the RE1688 kit found here http://jo.my/1rsi05

A: Hello DocTJ, Thank you for the question. This comes with the adjustable track bar, heim joint, heim joint spacers, bushing and sleeve. You will reuse the factory installation hardware.

A: Hello Texasjk, Thank you for the question. No additional brackets are needed to install the Rubicon Express Adjustable Front Track Bar Part Number: R/ERE1673

A: Hello Jimbo, Thank you for the question. No hardware of instructions come with the Rubicon Express Adjustable Extreme Duty Front Track Bar R/ERE1680. You will reuse the (2) factory bolts to install. After installation we suggest having the vehicle professionally aligned.

A: David- Thank you for your question. The Rubicon Express Track Bar Adjustable Front TJ/LJ/XJ/MJ/ZJ 3.5"-4.5" will not fit the Right hand drive 98 TJ Sport with a 4 inch lift. We carry stock replacements, unfortunately we don't have any adjustable track bars for the right hand drive.

A: Hello amelya, The Rubicon Express Track Bar Adjustable Front TJ/LJ/XJ/MJ/ZJ 3.5"-4.5" R/ERE1600 will fit your vehicle application. This will help eliminate a steering shimmy provided the front axle ball joints and wheel bearings are ok. Thank you for the email.

A: Hello Sean, This track bar is designed for the 1997 to 2006 TJ Wrangler, Rubicon and Unlimited;Fits 1984 to 2001 XJ Cherokee, 1986 to 1992 MJ Comanche, 1993 to 1998 ZJ Grand Cherokee only. It will not fit the 2000 Dodge Ram 1500. Thank you for the email.

A: Hello gman, The Rubicon Express Adjustable Front Track Bar R/ERE1673 fits the front of the 2007 to 2014 JK Wrangler, Rubicon and Unlimited with 3.5" and up. Thank you for the email.

A: MIcah- This Rubicon Express Adjustable track Bar will not fit a stock height 2005 Wrangler (TJ). If you are experiencing DW on a stock vehicle there could be a few issues involved. I would first have your front suspension checked for any worn components (ball joints, tie rod ends, track bar, steering damper). These with a good amount of wear are the number one cause of DW issues. Second thing to check is your alignment, this is one of the most over looked causes of DW. Next up would be tire balance, for a bigger tire like a Jeep you would need to make sure they are "Road Force" balanced as many large tires will not show an balance issue on a standard tire balancer. If all three of these things are ok your issue should be solved

A: kyle, The Rubicon Express Track Bar Adjustable Front TJ/LJ/XJ/MJ/ZJ 3.5"-4.5" R/ERE1600 is the perfect addition to a 1984 to 2001 Jeep XJ Cherokee. This track bar keeps the front axle firmly locked in the center of the vehicle. This will eliminate the shimmy you describe.

A: Yes the Rubicon Express Adjustable Extreme-Duty Front Track Bar for XJ/ZJ with a 4.5"-7.5" lift is the track bar you will need. You will need the R/ERE1665 bracket to use this bar.

A: Chris, Yes, the Rubicon Express Track Bar Adjustable Front TJ/LJ/XJ/MJ/ZJ 3.5"-4.5" R/ERE1600 will for your 1993 Jeep ZJ Grand Cherokee

A: This Rubicon Express Adjustable Track bar will not fit your vehicle. If you only have a leveling spacer on your 1999 Grand Cherokee (WJ) and you are experiencing "death wobble" you may want to check a few different things starting with the condition of the bushings, ball joints, tie rods ends, and steering stabilizer. I would next check the alignment. Misaligned suspension is one of the most overlooked causes of "death wobble". If you find you need a track bar replacement you can use the Crown Replacement Track bar here http://jo.my/cro52088305ab